JVC RX-DP9VBK Attenuating the Input Signal, Turning Line Direct On and Off, Muting the Sound

Attenuating the Input Signal

When the input level of the playing source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent sound distortion.

• You have to make this setting for each source.

On the unit ONLY:
Press INPUT ATT (inside the front
	INPUT ATT
door).

• Each time you press the button, the input

attenuator mode turns on (“INPUT ATT ON”) or

off (“INPUT ATT OFF”).

• When the input attenuator is on, the INPUT ATT indicator also

Turning Line Direct On and Off

You can enjoy the sound closer to original source by skipping the sound adjustments such as Midnight mode (see page 31), speaker output level adjustments (see page 37) and Parametric Equalizer (see page 37). You can only adjust the volume level while Line Direct is in use.

• You have to make this setting for each source.

Press LINE DIRECT.

•Each time you press the button, Line Direct turns on and off.

–When Line Direct turns on, “LINE DIRECT” appears in the main display.

lights up.

ANALOG		SPEAKERS	1
L	R
SUBWFR		INPUT ATT	VOLUME

dB

LINE DIRECT

On the unit

LINE DIRECT

On the remote control

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

Ex. When the source is “VIDEO.”

Notes:

•This effect is applied to only the sources connected to the analog terminals.

•This function is not valid for the DVD MULTI playback mode.

Muting the Sound

From the remote control ONLY:

Press MUTING to mute the sound			MUTING
through all speakers and headphones
connected.
“MUTING” appears on the display and the volume
turns off (the volume level indicator goes off).
	ANALOG	SPEAKERS	1
	L R
	SUBWFR

Ex. When the source is “VIDEO.” The volume level indicator goes off.

To restore the sound, press MUTING again so that “MUTING OFF” appears on the display for a while.

•Turning MASTER VOLUME on the unit or pressing VOLUME +/– on the remote control also restores the sound.

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

(inside the front door)

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

Ex. When the source is “VIDEO.”

Notes:

•If you turn on Line Direct while using the Surround and DSP modes, the effect changes as follows:

Input	Mode	Surround	DSP
Analog		Not valid	Not valid
Digital		Valid	Not valid

•If you turn on Line Direct, CC Converter (see page 22) is canceled.

•Turning off Line Direct activates the sound adjustments previously selected such as Midnight mode, speaker output level adjustments and Parametric Equalizer.

•If you turn off Line Direct while listening to an analog source, muting time* will be a little longer. (* The period during which no sound comes out.)

21