Polar DA20 manual To change the battery

Page 23

E N G L I S H

•The backlight and sound are automatically turned off when the low battery indicator is displayed. Any alarms set prior to the appearance of the low battery indicator will remain active.

To change the battery:

1.Open the battery cover with a coin by turning it from CLOSE to OPEN.

2.Remove the battery cover and lift the battery (CR2025) out carefully with a suitably sized small rigid stick or bar. This can be a toothpick or small screwdriver. However, a non-metal tool is preferable. Be careful not to damage the metal sound element (*) or the grooves.

3.Insert a new battery with the positive (+) side outwards.

4.Replace the old sealing ring with a new one, fitting it snugly in the cover groove to ensure water resistance.

5.Put the cover back on and turn it clockwise to

CLOSE.

6.Re-enter the basic settings. For further information, see Basic Settings.

Customer Service Information 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents G L I S H Contents Benefits of Your Polar FA20 FA20 Buttons GET StartedBasic Settings Menu Structure Activity Your Daily ActivityDate Activity LogFA20 gives you feedback Active day. Well done Set training target Adjust training soundsTraining Start TrainingView the following information during training During TrainingDistance Time Minutes active time. Excellent Stop Training After Training HEALTH/FITNESS Transfer Data User Information SettingsTraining Settings Watch, Time and DateGeneral Settings Caring for Your Polar FA20 Customer Service InformationBattery To change the battery Service Minimizing possible risks PrecautionsIf the battery of the wrist unit must be replaced TroubleshootingIf you dont know where your are in the menu If the low battery symbol is visible, this may meanSystem requirements Technical SpecificationsWater Resistance Limited Polar International Guarantee Guarantee and DisclaimerDisclaimer
Top Page Image Contents