E N G L I S H
Troubleshooting
If you don't know where your are in the menu,
press and hold BACK until the time is displayed.
If there are no reactions to any buttons or if the
display is behaving abnormally, reset the wrist unit by pressing four buttons (UP, DOWN, BACK and LIGHT) simultaneously for four seconds. The activity log and all other settings except time and date will be saved.
If the animation on the display is not moving while
you are, make sure you are recording, see "Start Training", then move effectively and fast enough for the animation to move. Too slow or too careful movement may also stop the animation, as such movement is not considered beneficial enough.
If the display is blank, the FA20 may be in battery saving mode, as it is dispatched from the factory. Press any button for one second. For more, see Basic Settings.
If the low battery symbol is visible, this may mean
that the battery needs changing. For further information, see Care and Maintenance.
If the battery of the wrist unit must be replaced,
we recommend you service your device at an authorized Polar Service Center only. This is especially necessary to ensure that the guarantee remains valid and is not affected by incorrect repair procedures performed by an unauthorized agent. Polar Service will test your FA20 for water resistance after battery replacement, and make a full check of the device.
26 Customer Service Information