Acumen EON-2027HS, EON-2028HS manual Getting Going

Part I

GETTING GOING

Charging the Battery

!CAUTION - ONLY CHARGE WITH A RECHARGEABLE, LITHIUM BATTERY (LIR 2032) AND THE 110-VOLT(1)OR 230-VOLT(2)AC/DC

TRANSFORMER PROVIDED. OTHER BATTERY AND TRANSFORMER WILL CAUSE INJUREY AND DAMAGE.

*(1) For US only (2) For European country

Fig.1

The watch must be fully charged before its initial use. When the watch displays ìLOW BATT.î (as shown in Figure 1) means the battery in your watch need to be charged, please follow the below sequences to charge the battery:

Step 1: Use the Connector with one end clamp to the watch and the other end connect with the PC Interface and Charger (for EON- 2028HS) or Charger (for EON-2027HS). Make sure the three pins in the clamp are properly in contact with the three contacting points on the watch. (as shown in Figure 2 & 3)

Fig.2 Fig.3

14