JVC MX-J300 manual Connecting Other Equipment, Press and hold Demo for more than Seconds.DEMO

Page 13

Connecting Other Equipment

You can connect an audio equipment — used only as a playback device.

When you connect and use this equipment, refer also to its manual.

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

ANTENNA
FM
FM
75	GND
AM
EXT	GND
AM LOOP
AUX
IN
RIGHT	LEFT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
SPEAKERS
RIGHT	LEFT
	Audio equipment
To audio output

Connect the audio output jacks on the other equipment and the AUX IN jacks on the rear, using an audio cord (not supplied).

NOW, you can plug in the unit and other connected equipment FINALLY!

	ANTENNA
	FM
FM
75	GND
AM
EXT	GND
	AM LOOP

AUX

IN

RIGHT LEFT

CAUTION:

SPEAKER IMPEDANCE 6~16 OHMS

SPEAKERS
RIGHT	LEFT

To a wall outlet

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

To stop the display demonstration, press any button on the

unit or the remote control.

To start the display demonstration manually

Press and hold DEMO for more than 2

seconds.DEMO

CANCEL

To stop the demonstration, press any button.

– 10 –

Image 13

Contents MX-J300 MX-J200 Mises en garde, précautions et indications diverses For Canada/pour le Canada Introduction PrecautionsAbout This Manual Contents CA-MXJ300 Location of the Buttons and ControlsCA-MXJ300 Front Panel Powered Rolling PanelDisplay Window CA-MXJ200 These buttons do not function as 1 / Á CA-MXJ200 Front PanelRemote Control Remote ControlGetting Started Connecting AntennasUnpacking FM antennaRelease the finger from the clamp Connecting SpeakersAM antenna To connect an outdoor AM antennaPress and hold Demo for more than Seconds.DEMO Connecting Other EquipmentTo connect audio equipment To start the display demonstration manuallyCommon Operations Setting the ClockAdjusting the Volume Turning On the Power and Selecting the SourcesSelecting the Sound Modes Reinforcing the Bass SoundTo select the sound modes, press Sound Surround modesTuning in a Preset Station Tuning in a StationPresetting Stations Listening to FM and AM BroadcastsLoading CDs Playing Back CDsPlaying Back the Entire Discs Continuous Play Basic CD OperationsProgram Play To check the program contents Select the Random play mode On the unitPlaying at Random Random Play Prepare CDsProhibiting Disc Ejection Tray Lock Repeating Tracks or CDs Repeat PlayIf you try to eject CDs Playing Back a Tape Playing Back TapesRecording Tapes on Deck B RecordingPress Eject 0for the deck B Start recording On the unit Press REC START/STOPDubbing Tapes To record on both sides Reverse ModeCD Direct Recording Press DubbingUsing Daily Timer Using the TimersWhen selecting Tuner FM or Tuner AM When selecting CDPress 4or ¢to set the volume level Press TimerSet the volume level Using Recording TimerTimer setting How Recording Timer actually worksPress Timer until REC appears To turn on On the remote controlPress Power to turn off the unit on standby if necessary Put a recordable cassette into deck B Press ShiftUsing Sleep Timer Timer PrioritySelect the preset station On the remote control only Press SleepHandling discs MaintenanceCassette decks Specifications TroubleshootingHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 0200KSMMDWHIT