Setting the surround back speakers | JVC LVT1437-001A specs

JVC LVT1437-001A, 1105RYMMDWJEIN Setting the surround back speakers, Setting the speaker distance

7Setting the surround back speaker(s)

—S BACK OUT

S BACK OUT: 1SPK Select when you use 1 surround back speaker.

S BACK OUT: 2SPK Select when you use 2 surround back speakers.

Initial setting: S BACK OUT: 2SPK

NOTES

• If you have selected “SMALL” for the front speaker size, you

cannot select “LARGE” for other speakers.

• When “SUBWOOFER” is set to “SUBWOOFER: NO,” the front

speaker size is fixed to “LARGE” (and you cannot select

“SMALL”).

• When “SURR SPK” is set to “SMALL,” you cannot select

“LARGE” for the surround back speaker.

SBL

3.3 m

(11 ft)

3.0 m

(10 ft)

2.7 m

(9 ft)

2.4m (8 ft)

2.1m (7 ft)

SBR

• When “SURR SPK” is set to “NO,” the surround back speaker is

fixed to “NO.”

• When “S BACK SPK” is set to “NO,” you cannot select “S BACK

OUT.”

• When “S BACK OUT” is set to “S BACK OUT: 1SPK,” connect

the surround back speaker to the left surround back speaker

terminal (see page 8). No sound comes from the surround back

speaker if you connect it to the right surround back speaker

terminal.

7Setting the speaker distance

The distance from your listening point to the speakers is one of the important elements to obtain the best possible sound effect from the Surround/DSP modes.

By referring to the speaker distance, the receiver automatically sets the delay time of the sound through each speaker so that sounds through all the speakers can reach you at the same time.

7Measuring unit—DISTANCE UNIT Select which measuring unit you use.

DISTANCE UNIT: meter Select to set the distance in meters.

DISTANCE UNIT: feet Select to set the distance in feet.

Initial setting: DISTANCE UNIT: meter

7Speaker distance—

FL SPK DIST. (for the left front speaker), FR SPK DIST. (for the right front speaker), C SPK DIST. (for the center speaker),

SL SPK DIST. (for the left surround speaker), SR SPK DIST. (for the right surround speaker), SBL SPK DIST. (for the left surround back speaker), SBR SPK DIST. (for the right surround back speaker)

Adjustable range: 0.3 m to 9.0 m in 0.3 m intervals (1 ft to 30 ft in 1 ft intervals)

Initial setting: 3.0 m (10 ft) for all speakers

In this case, set the distance as follows:

Left front speaker (FL):	“FL SPK DIST.: 3.0m (10ft)”
Right front speaker (FR):	“FR SPK DIST.: 3.0m (10ft)”
Center speaker (C):	“C SPK DIST.: 3.0m (10ft)”
Left surround speaker (SL):	“SL SPK DIST.: 2.7m (9ft)”
Right surround speaker (SR):	“SR SPK DIST.: 2.7m (9ft)”
Left surround back speaker (SBL):	“SBL SPK DIST.: 2.4m (8ft)”
Right surround back speaker (SBR):	“SBR SPK DIST.: 2.4m (8ft)”

NOTES

•You cannot set the speaker distance for the speakers you have set to “NO.”

•If you have selected “S BACK OUT: 1SPK” for “S BACK OUT” (see the left column), “SB SPK DIST.” appears instead of “SBL SPK DIST.” and “SBR SPK DIST.”