JVC 1105RYMMDWJEIN, LVT1437-001A manual Above ALL

Page 4

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way—switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws—to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case—this could result in a fatal electrical shock.;

NEVER guess or take chances with electrical equipment of any kind—it is better to be safe than sorry!

G-3

Image 4
Contents RX-D701S / RX-D702B Information for Users on Disposal of Old Equipment Important for the U.KIf in Doubt Consult a Competent Electrician European UnionRegulatory information Above ALL Features PrecautionsTable of Contents Remote control When operating a DVD player, set the mode selector o to DVDParts identification TV, VCR, DVR/DVD, FM/AM, USB, AUX, VideoHow to open the front door Front panelInside the front door Press down on PUSH-OPEN See pages in parentheses for detailsDisplay window Rear panelBefore Installation Putting batteries in the remote controlChecking the supplied accessories Getting startedConnecting the FM and AM MW antennas FM antenna connectionFM antenna supplied AntennaConnecting the speakers Speaker Layout DiagramConnecting the speakers Connecting the powered subwooferConnecting video components Before connecting video componentsVideo conversion function HdmiConnecting a TV Green Component video cable not supplied Blue RedTurn off all components before making ConnectionsConnecting a DVD recorder or DVD player RedMonaural audio cable not supplied Signal current When you enjoy sound recorded in DVD-AudioWhite Stereo audio cableConnecting a VCR Scart cable not supplied Signal currentComponent video cable not supplied Hdmi cable not supplied GreenComponent video cable not supplied Connecting another video component to the Video in jacksHdmi cable not supplied How to open the front door Connecting a video component to the AUX input jacksVideo camera, etc Connecting the power cord Digital audio connectionTurn off all components before making connections Digital input terminalsUSB connection For USB TerminalHow to install the USB drivers USB drivers are installed automaticallyCheck if the drivers are correctly installed USB TerminalTurn on the power To turn off the power into standbyPress STANDBY/ON or Audio on the remote control Basic operationsAdjust the volume Selecting the video input settingSelecting the audio input setting Hdmi Digital AnalogSelecting the digital decode mode Listening with headphonesFrom the remote control only Press Dimmer repeatedly Turning off the sounds temporarilyTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Making sounds naturalBasic settings Press and hold Smart S. Setup until Setting UP flashesSBR SBL SL Basic setting items From the remote controlOperation through on-screen display menus Menu operation buttonsSetup menu configuration SeeMenu operating procedure Button indications on the screenTo select the desired submenu, press 5 or ∞ repeatedly Usable buttons and their functionsSetting the items Setting the speakersSetting subwoofer information-SUBWOOFER Press SETSetting the surround back speakers Setting the speaker distanceInitial setting S Back OUT 2SPK Speaker distanceActivating the EX/ES/PLIIx setting-EX/ES/ PLIIx Setting bass soundSetting subwoofer output-SUBWFR OUT Selecting the main or sub channelUsing the Midnight mode-MIDNIGHT Setting the low frequency effect attenuatorSetting the crossover frequency-CROSSOVER Midnight OFFSetting the Audio delay level Memorizing the volume level for each source-ONE Touch OPSetting the Auto Function mode Selecting the output video signalsSuperimposing the menus Sound adjustments Basic adjustment itemsAdjust Menu To start the adjustment, press To select the desired submenu, press Or ∞ repeatedlyAdjusting the speaker output levels Adjusting the itemsPress Test to check the speakers’ output balance Adjusting the sound parameters for the Surround/DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the virtual room size for DSP modesAdjusting the liveness effect for DSP modes Adjusting the center tone-CENTER ToneTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationUsing the Radio Data System RDS to receive FM stations What information can RDS signals provide?RDS indicator Press Display while listening to an FM stationTo search for a program using the PTY codes Searching for a program by PTY codesPTY codes Press PTY Search while listening to an FM stationDescription of the PTY codes TA Traffic Announcement in your area TA News Info TA/NEWS TA/INFODisplay Creating realistic sound fields Reproducing theatre ambienceIntroducing the Surround modes Dolby DigitalAbout other digital signals DTSAll Channel Stereo mode ALL CH Stereo 3D Headphone modeIntroducing the DSP modes Digital Acoustic Processor DAP modesUsing the Surround/DSP modes About the DSP modesVirtual Surround Back AutoWhen you select Auto Surround From the remote control Select and play any sourceTurn Multi JOG to select the Surround/DSP mode you want Selecting the Surround/DSP modesOperating other JVC products VCRChannel + REWChanging the remote control code for DVD recorder DVD recorder or DVD playerRelease DVR/DVD DVD MenuChanging the transmittable signals for operating a TV Operating other manufacturers’ productsManufacturers’ codes for TV Release TVChanging the transmittable signals for operating a VCR Release VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRChanging the transmittable signals for operating a STB Troubleshooting PowerProblem Possible Cause Solution Sound and pictureRemote control Tuner Correct antennaSpecifications AmplifierFM tuner IHF AM MW tunerVictor Company of Japan, Limited 1105RYMMDWJEIN