JVC 1105RYMMDWJEIN, LVT1437-001A manual White, Stereo audio cable, Not supplied Red

Do not connect the AC power plug to the wall outlet until all connections are completed.

When you connect a DVD recorder or DVD player with its analogue discrete output jacks (DVD MULTI IN):

If your DVD recorder or DVD player has analogue 5.1 channel output jacks, use the connection below. When a DVD Audio disc is played back, the original high-quality sounds can be reproduced by using this connection.

For video connection, see page 11.

Turn off all components before making connections.

Stereo audio cable (not supplied)

					Monaural audio cable
					(not supplied)
			DVD
White	DVR/DVD IN		MULTI IN		Stereo audio cable
			SURR-L	White
	FRONT	CENTER
					(not supplied)
Red				Red	Å	ı	Ç

SUBWOOFER SURR-R

Î	DVD recorder or
	DVD player

Monaural audio cable (not supplied)

: signal current

NOTE

Do not connect different components to the DVD MULTI IN jacks and AV IN/OUT (SCART) DVR/DVD terminal (see page 11); otherwise, sounds from both components come out of the speakers at the same time.

ÅTo left/right surround channel audio output ı To center channel audio output

Ç To left/right front channel audio output Î To subwoofer output

When you enjoy sound recorded in DVD-Audio...

You can enjoy sound recorded in DVD-Audio both with analogue or digital methods.

–With analogue method:

•connect your DVD recorder or DVD player to this receiver according to the diagram above.

•select “A MULTI” in the audio input setting. (See page 20.)

–With digital method:

•connect your DVD recorder or DVD player and TV to this receiver with the HDMI cables. (See page 11.)

•select “HDMI” in the audio input setting. (See page 20.)

NOTES

•When selecting “A MULTI” in the audio input setting or when multi channel PCM signals (see page 47) are coming in with selecting “HDMI” in the audio input setting, you can listen to the front channel sounds (left and right) only by using the headphones. 3D HEADPHONE mode (see page 48) is not available.

•When selecting “A MULTI” in the audio input setting or when multi channel PCM signals (see page 47) are coming in with selecting “HDMI” in the audio input setting, the following items are not available:

–DECODE MODE (see page 21)

–CC Converter (see page 22)

–EX/ES/PLllx (see page 30)

–DUAL MONO (see page 30)

–SUBWFR OUT (see page 30)

–CROSSOVER (see page 31)

–LFE ATT (see page 31)

–MIDNIGHT (see page 31)

–AUDIO DELAY (see page 32)

–DIGITAL EQ 63Hz/250Hz/1kHz/4kHz/16kHz (see page 38)

–BASS BOOST (see page 38)

–INPUT ATT (see page 38)

–Sound parameters for Surround/DSP modes (see pages 38 and 39)

–Surround/DSP modes (see pages 46 to 50)

•When you enjoy sound recorded in DVD-Audio through the HDMI connection, use a DVD recorder or DVD player compatible with HDMI version 1.1.

12