JVC LVT1437-001A, 1105RYMMDWJEIN manual Selecting the output video signals, Superimposing the menus

Selecting the output video signals

—VIDEO OUTPUT

To use the video conversion function (see page 9), you need to select this setting according to the connection method for a TV.

VIDEO OUTPUT: HDMI

Select this when connecting a TV with the HDMI cable.

VIDEO OUTPUT: CMPNT

Select this when connecting a TV with the component video cable.

VIDEO OUTPUT: S

Select this when connecting a TV with the SCART cable which receives S-video signals.

VIDEO OUTPUT: RGB/C

Select this when connecting a TV with the SCART cable which receives RGB or composite video signals.

Initial setting: VIDEO OUTPUT: HDMI

NOTE

To transmit the video signals selected in this setting, you need to connect a TV and this receiver with the cable which can transmit the selected video signals.

Superimposing the menus

—SUPERIMPOSE

You can select whether or not to superimpose the on-screen display on the TV screen.

SUPERIMPOSE: ON

Select to superimpose the on-screen display on the TV screen.

SUPERIMPOSE: OFF

Select to cancel superimposition. The on-screen display will be shown on the blue background screen.

Initial setting: SUPERIMPOSE: ON

NOTES

•Some on-screen displays appear on the TV screen regardless of this setting.

•When the video input setting (see page 20) is set to “CMPNT,” the on-screen display will be shown on the blue background screen even though “SUPERIMPOSE” is set to “SUPERIMPOSE: ON.”

•The on-screen display does not appear on the TV screen when the video input setting (see page 20) is set to “HDMI” or “RGB.”

Setting the Auto Function mode

—AUTO MODE

The source will be selected automatically simply by turning on a video component.

•This function takes effect for the video components connected to the receiver using the SCART cable—DVR/DVD and VCR.

Auto Function mode works as follows:

•When a video component is turned on, the receiver selects the video component as the source (and the TV input is changed automatically).

•When a video component currently selected as the source is turned off, the receiver changes the source to the video source previously selected—DVR/DVD, VCR, or VIDEO.

AUTO MODE: AUTO1 Auto Function mode works when the receiver is on.

AUTO MODE: AUTO2 Auto Function mode works whether or not the receiver is on. When the receiver is off, turning on a video component turns on the receiver, then the video component is selected as the source.

AUTO MODE: MANUAL You need to select the source manually.

Initial setting: AUTO MODE: MANUAL

When “AUTO MODE: AUTO1” or “AUTO MODE: AUTO2” is selected, the AUTO MODE indicator lights up on the display.

NOTE

When selecting VCR as the source, only turning on the VCR may not activate “AUTO MODE: AUTO1.” If this happens, you may need to start playback to activate Auto Function mode.

33