Precor EFX LCD manual 4InstallAssemblythe Bracket, Install the Bracket Assembly

Page 20

Cardio Theater Integrated Bracket Assembly Instructions

4InstallAssemblythe Bracket

1.Remove the bracket cover.

Loosen the bolts on the pivot tube using a ⁷⁄₃₂-inch hex key. Pull the bracket cover away from the assembly. Set it aside.

2.Feed the coaxial/power cable with its three connectors through the bracket assembly.

Ask your assistant to hold the bracket assem- bly near the upright support while you slide the coaxial/power cable and its three connectors (coaxial, power, and DVD) through the bracket assembly tube.

Bracket

assembly

Bracket cover

Bracket cover

1

2

Coaxial/power

cable with three

connectors

Install the Bracket Assembly

page 20

Image 20

Contents EFX Integrated LCD Screen Option Page Table of Contents Obtaining Service Unpacking the Equipment Before You BeginPreparations RequiredTools3Preparing the Unit Preparing the UnitPreparing the EFX546i Do not remove the handrail clamp screwsRubber grommet Upright support Handrail Upper support Upper Support Lower Back Front Preparing the EFX556i Preparing the EFX556iWhile you use a ¼-inch hex and ½-inch box Coaxial connector Replace two Screws at base Cable Rubber 4InstallAssemblythe Bracket Install the Bracket AssemblyBracket Assembly 5Attach the LCD Screen Attach the LCD ScreenDVD Reinstall the Bracket Cover 7Connect the Controller and the Cables Connect the Controller and the CablesPage