Precor EFX LCD manual Handrail

Page 9

Cardio Theater Integrated Bracket Assembly Instructions

8.Attach the power extension cable to the power connector on the coaxial/power cable.

Locate the coaxial/power cable provided with the LCD Screen. One end of the coaxial/power cable has three connectors; the other end has two connectors. Attach the power extension cable to the power connector on the end with the two connectors (coaxial and power).

9.Feed the coaxial/power cable with its connec- tors through the display console bracket.

Insert the coaxial/power cable with its two connectors up through the hole in the display console bracket.

10.Feed the coaxial/power cable with its connec- tors through the upright support.

Note: Leave about 3 feet (1 meter) of the coaxial/power cable with its three connectors (coaxial, power, and DVD) hanging out of the hole in the display console bracket. This portion of the cable will be fed through the bracket assembly before it is attached to the back of the display console.

8

 

9

Handrail

 

Power connector

 

 

 

 

 

Display

 

 

 

console

 

 

 

bracket

 

Power extension

 

 

 

cable

 

 

 

 

 

Display

 

 

 

console

10

Coaxial/power

 

 

 

cable

 

 

 

Display

 

 

 

console

 

 

 

bracket

 

 

 

 

Data

 

 

 

cable

 

 

Upright

Display

 

 

console

 

 

support

 

 

Preparing the EFX546i

page 9

Image 9
Contents EFX Integrated LCD Screen Option Page Table of Contents Before You Begin Obtaining Service Unpacking the EquipmentRequiredTools PreparationsPreparing the Unit 3Preparing the UnitDo not remove the handrail clamp screws Preparing the EFX546iRubber grommet Upright support Handrail Upper support Upper Support Lower Back Front Preparing the EFX556i Preparing the EFX556iWhile you use a ¼-inch hex and ½-inch box Coaxial connector Replace two Screws at base Cable Rubber Install the Bracket Assembly 4InstallAssemblythe BracketBracket Assembly Attach the LCD Screen 5Attach the LCD ScreenDVD Reinstall the Bracket Cover Connect the Controller and the Cables 7Connect the Controller and the CablesPage