Precor EFX LCD manual 7Connect the Controller and the Cables

Page 25

Cardio Theater Integrated Bracket Assembly Instructions

7Connect the Controller and the Cables

Note: Retrieve the rubber adapter mounts from the bracket assembly package. Retrieve the controller from the LCD Screen package.

1.Connect the controller cable to the controller.

A definite click is heard when the connector snaps into place inside its receptacle.

2.Place the rubber adapter mounts around the center of the bracket bar.

3.Secure the controller.

Use two tie wraps to secure the controller to the rubber adapter mounts and bracket bar.

4.At the base of the EFX, plug the power and coaxial connectors on the coaxial/power cable into the strip designed for Cardio Theater use.

Note: For more information, refer to the Cardio Theater LCD Screen manual.

 

Controller

Bracket bar

 

 

 

 

Rubber adapter

 

 

mounts

Controller cable

 

1

 

2

LCD screen

3

 

Controller

 

 

Tie wraps

 

 

Controller cable

 

 

Connect the Controller and the Cables

page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents EFX Integrated LCD Screen Option Page Table of Contents Before You Begin Obtaining Service Unpacking the EquipmentRequiredTools PreparationsPreparing the Unit 3Preparing the UnitDo not remove the handrail clamp screws Preparing the EFX546iRubber grommet Upright support Handrail Upper support Upper Support Lower Back Front Preparing the EFX556i Preparing the EFX556iWhile you use a ¼-inch hex and ½-inch box Coaxial connector Replace two Screws at base Cable Rubber Install the Bracket Assembly 4InstallAssemblythe BracketBracket Assembly Attach the LCD Screen 5Attach the LCD ScreenDVD Reinstall the Bracket Cover Connect the Controller and the Cables 7Connect the Controller and the CablesPage
Top Page Image Contents