JVC RX-7012RSL manual Receiving Radio Broadcasts, Tuning in Stations Manually, Using Preset Tuning

Page 21

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in Stations Manually

On the front panel:

1. Press FM/AM to select the band

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM (MW/LW)

(FM or AM — MW/LW).

FM/AM

stations.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM (MW/LW).

SPK 1

ANALOG

L

R

TUNED

VOLUME

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

2.Press FM/AM TUNING 5/ °until you find the frequency you want.

•Pressing FM/AM TUNING 5increases the frequency.

•Pressing FM/AM TUNING °decreases the frequency.

From the remote control:

1.Press FM/AM to select the band.

•Each time you press the button, the band alternates between FM and AM (MW/LW).

FM/AM TUNING

FM/AM

1.Tune in the station you want to preset (see “Tuning in Stations Manually”).

•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 19.

 

SPK 1

 

 

 

ANALOG

L

R

TUNED

VOLUME

2. Press MEMORY.

 

MEMORY

 

 

SPK 1

 

 

ANALOG L R

TUNED

VOLUME

2. Press TUNING +/– until you find

 

 

+

 

 

the frequency you want.

 

 

 

TUNING

• Pressing TUNING + increases the

 

 

−

 

 

frequency.

 

 

 

•Pressing TUNING – decreases the frequency.

Notes:

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

CH-

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3. Press FM/AM PRESET 5/ °to

FM/AM PRESET

select a channel number while the

 

channel number position is flashing.

 

SPK 1

 

 

ANALOG L R

TUNED

VOLUME

CH-

 

 

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for the tuner, not for the CD and others. (See page 32.)

4. Press MEMORY again while the

MEMORY

selected channel number is flashing on

 

the display.

 

The selected channel number stops flashing.

The station is assigned to the selected channel number.

SPK 1

ANALOG

L

R

TUNED

VOLUME

CH-

5.Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Remote Control Front Panel Ex. When you press CD buttonParts Identification Checking the Supplied Accessories Before InstallationConnecting the FM and AM MW/LW Antennas Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceVideo component connections CD playerCassette deck or CD recorder If your audio components have a Compu Link jackTo audio TV and/or DBS tunerDBS tuner DVD playerDigital connections Digital input terminalsDigital output terminal Putting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Listening only with headphones Adjusting the Volume Selecting the Front SpeakersHeadphone mode Selecting different sources for picture and soundAdjusting the Tone Attenuating the Input SignalAdjusting the Subwoofer Output Level Muting the SoundAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source NameSetting the Speakers for the DSP Modes Setting the Subwoofer InformationLFE ATT Low Frequency Effect Attenuator appears on Display To select the delay time of the rear speaker outputCrossover FRQ Crossover Frequency appears on the display Press Control UP 5/DOWNSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingUsing the Sleep Timer Storing the Basic Settings AdjustmentsTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Searching for a Program by PTY Codes Using the RDS Radio Data System to Receive FM StationsSwitching to a Broadcast Program Your Choice Temporarily You have selected If the FM station you are listening to isTo stop listening to the program selected by EON Using the DSP Modes What are the DSP Modes?Surround modes Available DSP modes according to the input mode DVD Multi Playback ModeReproducing the Sound Field DAP modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesBy pressing Surround on By pressing DSP MODE, Adjusting the Surround Modes Adjust the effect level Press DSP Mode repeatedly untilPress Effect to select an effect Level you wantAdjusting the DAP Modes To cancel the DSP mode To cancel the Dolby/DTS Surround modeActivating the DSP Modes Press Surround ON/OFFActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemCD player Cassette deck CD recorder Synchronized RecordingOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierTurntable CD changerCassette deck REWDVD player Operating Video ComponentsOperating Other Manufacturers’ Video Equipment Release CATV/DBS For Catv converterFor DBS tuner If there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR JVC Denon Panasonic Philips Pioneer Release Audio04, 05 RCA Samsung Sony Toshiba YamahaProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM MW/LW tuner0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.
Top Page Image Contents