JVC RX-7010RBK, RX-7012RSL manual Switching to a Broadcast Program Your Choice Temporarily

Page 24

From the remote control:

1. Press PTY SEARCH while listening to an FM station.

“PTY SELECT” flashes on the display.

2.Press and hold PTY + or PTY – until the PTY code you want appears on the display, while

“PTY SELECT” is flashing.

The display gives you the PTY codes described below.

3.Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.

PAUSE

PTY SEARCH

FF/

PTY+

/REW

PTY–

PAUSE

PTY SEARCH

Switching to a Broadcast Program of

Your Choice Temporarily

Another convenient RDS service is called “EON (Enhanced Other Network).”

The EON indicator lights up while receiving an FM station with the EON code. (The EON indicator also lights up while receiving an AM station but the EON function will not work.)

This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases:

•When you are listening to non-RDS stations (all AM — MW/LW and some FM stations).

•When the last received FM station is a non-RDS station.

•When the receiver is in standby mode.

While searching, “SEARCH” and the selected PTY code alternate on the display.

The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display are flashing.

If no program is found, “NOTFOUND” appears on the display.

PTY codes

NONE

ALARMNEWS

TEST

AFFAIRS

 

 

 

 

DOCUMENT

INFO (INFORMATION)

 

 

 

 

FOLK M (MUSIC)

SPORT

 

 

 

 

OLDIES

EDUCATE (EDUCATION)

 

 

 

 

 

 

 

 

NATION M (NATIONAL MUSIC)

DRAMA

 

 

 

 

 

 

 

 

COUNTRY

CULTURE

 

 

 

 

JAZZ

SCIENCE

 

 

 

 

 

 

LEISURE

VARIED

 

 

 

 

 

 

TRAVEL

POP M (MUSIC)

 

 

 

 

 

 

 

 

PHONE IN

ROCK M (MUSIC)

 

 

 

 

 

 

 

 

RELIGION

EASY M (MUSIC)

 

 

 

 

 

 

 

 

SOCIAL (AFFAIRS)

LIGHT M (MUSIC)

 

 

 

 

 

 

 

 

 

 

 

 

CLASSICS

CHILDREN

 

 

 

 

FINANCE

OTHER M (MUSIC)

WEATHER

Before you start, remember...

• The EON function is only applicable to preset stations.

On the front panel ONLY:

1. Press EON so that the last selected

EON

 

program type appears on the

 

display.

 

The receiver enters EON standby mode. When the receiver is in EON standby mode, the receiver is ready to receive the EON data (TA/NEWS/INFO) you select.

2. Press TA/NEWS/INFO until the

TA/NEWS/INFO

program type you want appears on

 

the display.

 

•Each time you press the button, the display changes to show the following:

TA NEWS INFO TA/NEWS

TA/NEWS/INFO NEWS/INFO TA/INFO

TA:

Traffic Announcement in your area.

NEWS: News.

INFO: Program the purpose of which is to impart advice in the widest sense.

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Remote Control Front Panel Ex. When you press CD buttonParts Identification Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the subwoofer speakerConnecting the rear and center speakers About the speaker impedanceCD player Video component connectionsCassette deck or CD recorder If your audio components have a Compu Link jackTV and/or DBS tuner To audioDBS tuner DVD playerDigital connections Digital input terminalsDigital output terminal Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Adjusting the Volume Selecting the Front Speakers Listening only with headphonesHeadphone mode Selecting different sources for picture and soundAttenuating the Input Signal Adjusting the ToneAdjusting the Subwoofer Output Level Muting the SoundBasic Settings Adjusting the Front Speaker Output BalanceRecording a Source Changing the Source NameSetting the Subwoofer Information Setting the Speakers for the DSP ModesTo select the delay time of the rear speaker output LFE ATT Low Frequency Effect Attenuator appears on DisplayCrossover FRQ Crossover Frequency appears on the display Press Control UP 5/DOWNDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeStoring the Basic Settings Adjustments Using the Sleep TimerTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Using the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesSwitching to a Broadcast Program Your Choice Temporarily You have selected If the FM station you are listening to isTo stop listening to the program selected by EON Using the DSP Modes What are the DSP Modes?Surround modes DVD Multi Playback Mode Available DSP modes according to the input modeReproducing the Sound Field DAP modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesBy pressing Surround on By pressing DSP MODE, Adjusting the Surround Modes Press DSP Mode repeatedly until Adjust the effect levelPress Effect to select an effect Level you wantAdjusting the DAP Modes To cancel the Dolby/DTS Surround mode To cancel the DSP modeActivating the DSP Modes Press Surround ON/OFFUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverCD player Cassette deck CD recorder Synchronized RecordingOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer TurntableCassette deck REWOperating Video Components DVD playerOperating Other Manufacturers’ Video Equipment Release CATV/DBS For Catv converterFor DBS tuner If there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR Release Audio JVC Denon Panasonic Philips Pioneer04, 05 RCA Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM MW/LW tuner0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.
Top Page Image Contents