JVC RX-7012RSL manual Using the DVD Multi Playback Mode, Activating the DVD Multi Playback Mode

Page 33

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating the DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

From the remote control:

 

1. Press DVD MULTI so that “DVD

DVD MUILTI

MULTI” appears on the display.

 

Note:

When you select “DVD MULTI” as the source to play, the DSP mode is canceled, and the SURROUND ON/OFF and DSP MODE buttons do not work.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

1. Press DVD MULTI so that “DVD

DVD MULTI

MULTI” appears on the display.

Note:

When you select “DVD MULTI” as the source to play, the DSP mode is canceled, and the SURROUND ON/OFF and DSP MODE buttons do not work.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Adjust the speaker output levels.

1) Press ADJUST repeatedly until one of

ADJUST SETTING

the following indications appears on

 

the display.

 

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

2) Press CONTROL UP 5/DOWN °to

CONTROL

adjust the selected speaker output level

DOWN UP

 

(from +10 dB to –10 dB).

 

3)Repeat 1) and 2) to adjust the other speaker output levels.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Press SOUND.

SOUND

 

The 10 keys are activated for adjusting the sound.

4.Adjust the speaker output levels.

•To adjust the center speaker level, press CENTER +/– (from +10 dB to –10 dB).

•To adjust the left rear speaker level, press REAR•L +/– (from +10 dB to –10 dB).

•To adjust the right rear speaker level, press REAR•R +/– (from +10 dB to –10 dB).

– CENTER+

– REAR• L+

– REAR• R+

2

3

5

6

8

9

 

MENU

 

ENTER

 

 

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Remote Control Front Panel Ex. When you press CD buttonParts Identification Checking the Supplied Accessories Before InstallationConnecting the FM and AM MW/LW Antennas Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceVideo component connections CD playerCassette deck or CD recorder If your audio components have a Compu Link jackTo audio TV and/or DBS tunerDBS tuner DVD playerDigital connections Digital input terminalsDigital output terminal Putting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Listening only with headphones Adjusting the Volume Selecting the Front SpeakersHeadphone mode Selecting different sources for picture and soundAdjusting the Tone Attenuating the Input SignalAdjusting the Subwoofer Output Level Muting the SoundAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source NameSetting the Speakers for the DSP Modes Setting the Subwoofer InformationLFE ATT Low Frequency Effect Attenuator appears on Display To select the delay time of the rear speaker outputCrossover FRQ Crossover Frequency appears on the display Press Control UP 5/DOWNSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingUsing the Sleep Timer Storing the Basic Settings AdjustmentsTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Searching for a Program by PTY Codes Using the RDS Radio Data System to Receive FM StationsSwitching to a Broadcast Program Your Choice Temporarily You have selected If the FM station you are listening to isTo stop listening to the program selected by EON Using the DSP Modes What are the DSP Modes?Surround modes Available DSP modes according to the input mode DVD Multi Playback ModeReproducing the Sound Field DAP modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesBy pressing Surround on By pressing DSP MODE, Adjusting the Surround Modes Adjust the effect level Press DSP Mode repeatedly untilPress Effect to select an effect Level you wantAdjusting the DAP Modes To cancel the DSP mode To cancel the Dolby/DTS Surround modeActivating the DSP Modes Press Surround ON/OFFActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemCD player Cassette deck CD recorder Synchronized RecordingOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierTurntable CD changerCassette deck REWDVD player Operating Video ComponentsOperating Other Manufacturers’ Video Equipment Release CATV/DBS For Catv converterFor DBS tuner If there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR JVC Denon Panasonic Philips Pioneer Release Audio04, 05 RCA Samsung Sony Toshiba YamahaProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM MW/LW tuner0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.
Top Page Image Contents