JVC RX-7010RBK manual Getting Started, Before Installation, Checking the Supplied Accessories

Page 6

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between –5˚C and 35˚C (23˚F and 95˚F).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM (MW/LW) Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Connecting the FM and AM (MW/LW) Antennas

FM Antenna Connections

A

ANTENNA

75

B

ANTENNA

75

 

 

FM

 

 

FM

 

 

COAXIAL

 

 

COAXIAL

 

AM

AM

 

AM

AM

 

EXT

 

EXT

 

LOOP

 

LOOP

 

 

 

 

 

 

 

FM Antenna

 

 

ANTENNA

 

Extend the supplied FM antenna horizontally.

 

FM 75

 

 

 

 

COAXIAL

 

 

 

AM

Outdoor FM Antenna Cable

LOOP

AM

EXT

A.Using the Supplied FM Antenna

The FM antenna provided can be connected to the FM 75 Ω COAXIAL terminal as temporary measure.

B.Using the Standard Type Connector (Not Supplied)

A standard type connector (IEC or DIN45325) should be connected to the FM 75 Ω COAXIAL terminal.

Note:

If reception is poor, connect the outdoor antenna.

Before attaching a 75 Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Remote Control Front Panel Ex. When you press CD buttonParts Identification Connecting the FM and AM MW/LW Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM MW/LW Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker About the speaker impedanceCassette deck or CD recorder CD playerVideo component connections If your audio components have a Compu Link jackDBS tuner TV and/or DBS tunerTo audio DVD playerDigital connections Digital input terminalsDigital output terminal Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Headphone mode Adjusting the Volume Selecting the Front SpeakersListening only with headphones Selecting different sources for picture and soundAdjusting the Subwoofer Output Level Attenuating the Input SignalAdjusting the Tone Muting the SoundRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameSetting the Subwoofer Information Setting the Speakers for the DSP ModesCrossover FRQ Crossover Frequency appears on the display To select the delay time of the rear speaker outputLFE ATT Low Frequency Effect Attenuator appears on Display Press Control UP 5/DOWNDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeStoring the Basic Settings Adjustments Using the Sleep TimerTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Using the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesSwitching to a Broadcast Program Your Choice Temporarily You have selected If the FM station you are listening to isTo stop listening to the program selected by EON Using the DSP Modes What are the DSP Modes?Surround modes Reproducing the Sound Field DVD Multi Playback ModeAvailable DSP modes according to the input mode DAP modesAvailable DSP Modes According to the Speaker Arrangement Available DSP modesBy pressing Surround on By pressing DSP MODE, Adjusting the Surround Modes Press Effect to select an effect Press DSP Mode repeatedly untilAdjust the effect level Level you wantAdjusting the DAP Modes Activating the DSP Modes To cancel the Dolby/DTS Surround modeTo cancel the DSP mode Press Surround ON/OFFPress DVD Multi so that DVD Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Multi appears on the displayCD player Cassette deck CD recorder Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierCassette deck CD changerTurntable REWOperating Video Components DVD playerOperating Other Manufacturers’ Video Equipment Release CATV/DBS For Catv converterFor DBS tuner If there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR 04, 05 Release AudioJVC Denon Panasonic Philips Pioneer RCA Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionFM tuner IHF SpecificationsAmplifier AM MW/LW tuner0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.
Top Page Image Contents