JVC RX-7012RSL, RX-7010RBK manual Release CATV/DBS, For Catv converter, For DBS tuner

Page 39

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS .

2.Press CATV/DBS CONTROL.

3.Enter manufacturer’s code using buttons 1–9,

and 0.

See the list to the right to find the code.

4. Release CATV/DBS .

The following buttons can be used for operating the CATV converter or DBS tuner:

CATV/DBS

 

:

Turns on and off the CATV converter

 

 

 

or DBS tuner.

CH +/–:

 

 

Changes the channels.

1 – 10, 0, 100+ (+10):

Selects the channels.

 

 

 

The 10 button will function as the

ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer to the manual supplied with your CATV converter or DBS

tuner.

5. Try to operate your CATV converter or DBS

tuner by pressing CATV/DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner , try each one until the correct one is entered.

Note:

You cannot use both the CATV converter and DBS tuner at the same

time.

For CATV converter

Manufacturer

Codes

GENERAL INSTRUMENT

06, 07, 08, 09, 10,

 

11, 12, 13, 14, 29

HAMLIN/REGAL

01, 02, 03, 04, 05

JERROLD

06, 07, 08, 09, 10,

 

11, 12, 13, 14

OAK

15, 16, 17

PANASONIC

18, 19, 20

PIONEER

21, 22

SCIENTIFIC ATLANTA

23, 24, 25

TOCOM

26

ZENITH

27, 28

 

 

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

For DBS tuner

 

 

Manufacturer

Codes

JVC

56, 57, 67

AMSTRAD

43, 44, 45, 46, 47, 48, 49

BLAUPUNKT

30

ECHOSTAR

50, 51, 67

GOLDSTAR

31

GRUNDIG

32, 33

HIRSHMANN

48, 52, 53, 54, 55

INSTRUMENT

68

ITT/NOKIA

34

KATHREIN

52, 58, 59, 60, 61, 62, 63

NEC

35, 36

ORBITECH

48

PHILIPS

37, 38

RCA

65

SAMSUNG

39, 40

SCHWAIGER

61, 64

SIEMENS

41, 42

SONY

66

TECHNISAT

48

 

 

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

36

Image 39
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Remote Control Front Panel Ex. When you press CD buttonParts Identification Getting Started Before InstallationChecking the Supplied Accessories Connecting the FM and AM MW/LW AntennasAM MW/LW Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAbout the speaker impedance Connecting Audio/Video ComponentsConnecting the subwoofer speaker Connecting the rear and center speakersIf your audio components have a Compu Link jack CD playerVideo component connections Cassette deck or CD recorderDVD player TV and/or DBS tunerTo audio DBS tunerDigital connections Digital input terminalsDigital output terminal R6PSUM-3/AA15F Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Selecting different sources for picture and sound Adjusting the Volume Selecting the Front SpeakersListening only with headphones Headphone modeMuting the Sound Attenuating the Input SignalAdjusting the Tone Adjusting the Subwoofer Output LevelChanging the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Recording a SourceSetting the Speakers for the DSP Modes Setting the Subwoofer InformationPress Control UP 5/DOWN To select the delay time of the rear speaker outputLFE ATT Low Frequency Effect Attenuator appears on Display Crossover FRQ Crossover Frequency appears on the displaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingUsing the Sleep Timer Storing the Basic Settings AdjustmentsTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Searching for a Program by PTY Codes Using the RDS Radio Data System to Receive FM StationsSwitching to a Broadcast Program Your Choice Temporarily You have selected If the FM station you are listening to isTo stop listening to the program selected by EON Using the DSP Modes What are the DSP Modes?Surround modes DAP modes DVD Multi Playback ModeAvailable DSP modes according to the input mode Reproducing the Sound FieldAvailable DSP Modes According to the Speaker Arrangement Available DSP modesBy pressing Surround on By pressing DSP MODE, Adjusting the Surround Modes Level you want Press DSP Mode repeatedly untilAdjust the effect level Press Effect to select an effectAdjusting the DAP Modes Press Surround ON/OFF To cancel the Dolby/DTS Surround modeTo cancel the DSP mode Activating the DSP ModesMulti appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVDSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver CD player Cassette deck CD recorderSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerREW CD changerTurntable Cassette deckDVD player Operating Video ComponentsOperating Other Manufacturers’ Video Equipment Release CATV/DBS For Catv converterFor DBS tuner If there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR RCA Samsung Sony Toshiba Yamaha Release AudioJVC Denon Panasonic Philips Pioneer 04, 05Problem Possible Cause Solution TroubleshootingAM MW/LW tuner SpecificationsAmplifier FM tuner IHF0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.