JVC RX-7010RBK Connecting Audio/Video Components, About the speaker impedance, Analog connections

Page 8

About the speaker impedance

The required speaker impedance of the front speakers does differ depending on whether both the FRONT SPEAKERS 1 and FRONT SPEAKERS 2 terminals are used or only one of them is used.

CASE 1 When you connect only one pair of front speakers

Front

Front

speaker

speaker

Connecting the subwoofer speaker

You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs (not supplied).

SUBWOOFER

1

1

Powered subwoofer

OUT

Use front speakers with 8 Ω – 16Ω impedance.

CASE 2 When you connect two pairs of front speakers

Front

Front

speaker

speaker

2

2

Front

Front

speaker

speaker

1

1

Use front speakers 16 Ω – 32Ω impedance.

Connecting the rear and center speakers

Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals.

Center

speaker

CENTER

 

REAR

 

 

 

SPEAKERS

 

SPEAKER

+

Left rear

Right rear

speaker

speaker

RIGHT LEFT

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver. Refer also to the manuals supplied with your components.

Audio Components

Video Components

 

 

• Turntable

• DVD player*

 

 

• CD player*

• TV*

 

 

• Cassette deck

• DBS tuner*

or CD recorder*

• VCR

*You can connect these components using the methods described in “Analog connections” (below) or in “Digital connections” (see page 8).

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

Turntable

If an earth cable is provided for your turntable, connect the cable to the AM (H) terminal on the rear panel.

Turntable

 

PHONO

 

 

CD

 

To audio

 

 

output

OUT

 

(REC)

 

 

TAPE

 

 

CDR

 

Ex.: This connection is for the

IN

 

(PLAY)

 

turntable with an MM (moving-

 

 

magnet) type cartridge.

OUT

 

(REC)

 

 

VCR

 

Note:

IN

 

(PLAY)

 

Any turntables incorporating a small-output cartridgeTV

such as an MC

 

SOUND

 

(moving-coil) type must be connected to this receiver through a

 

DBS

 

commercial head amplifier or step-up transformer. DirectRIGHT connectionLEFT

may result in insufficient volume.

 

AUDIO

5

Image 8
Contents RX-7010RBK / RX-7012RSL If in Doubt Consult a Competent Electrician RX-7010RBK RX-7012RSL Table of Contents Parts Identification Remote Control Front PanelEx. When you press CD button Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the subwoofer speakerConnecting the rear and center speakers About the speaker impedanceCD player Video component connectionsCassette deck or CD recorder If your audio components have a Compu Link jackTV and/or DBS tuner To audioDBS tuner DVD playerDigital output terminal Digital connectionsDigital input terminals Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FSelecting the Source to Play Turning the Power On and Off StandbyBasic Operations Adjusting the Volume Selecting the Front Speakers Listening only with headphonesHeadphone mode Selecting different sources for picture and soundAttenuating the Input Signal Adjusting the ToneAdjusting the Subwoofer Output Level Muting the SoundBasic Settings Adjusting the Front Speaker Output BalanceRecording a Source Changing the Source NameSetting the Subwoofer Information Setting the Speakers for the DSP ModesTo select the delay time of the rear speaker output LFE ATT Low Frequency Effect Attenuator appears on DisplayCrossover FRQ Crossover Frequency appears on the display Press Control UP 5/DOWNDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeStoring the Basic Settings Adjustments Using the Sleep TimerReceiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Selecting the FM Reception Mode Using the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesSwitching to a Broadcast Program Your Choice Temporarily To stop listening to the program selected by EON You have selectedIf the FM station you are listening to is Surround modes Using the DSP ModesWhat are the DSP Modes? DVD Multi Playback Mode Available DSP modes according to the input modeReproducing the Sound Field DAP modesBy pressing Surround on By pressing DSP MODE, Available DSP Modes According to the Speaker ArrangementAvailable DSP modes Adjusting the Surround Modes Press DSP Mode repeatedly until Adjust the effect levelPress Effect to select an effect Level you wantAdjusting the DAP Modes To cancel the Dolby/DTS Surround mode To cancel the DSP modeActivating the DSP Modes Press Surround ON/OFFUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverCD player Cassette deck CD recorder Synchronized RecordingOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer TurntableCassette deck REWOperating Video Components DVD playerOperating Other Manufacturers’ Video Equipment For DBS tuner Release CATV/DBSFor Catv converter Try to operate your VCR by pressing VCR If there are more than one code listed for your brandRelease VCR Release Audio JVC Denon Panasonic Philips Pioneer04, 05 RCA Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM MW/LW tuner0301NHMMDWJEIN

RX-7012RSL, RX-7010RBK specifications

JVC has long been a respected name in the audio and video industries, and the RX-7012RSL and RX-7010RBK home theater receivers stand as testaments to the brand’s commitment to high-quality sound and advanced technology. These models are designed to enhance any home theater experience, thanks to their robust feature sets and impressive performance.

The RX-7012RSL offers a powerful 100 watts per channel, making it ideal for even the largest living rooms or media spaces. With a total of five channels, this receiver can seamlessly drive a full surround sound setup, allowing users to immerse themselves in their favorite movies and music. The RX-7010RBK, while slightly lower in power, still delivers exceptional quality at 80 watts per channel, providing ample output for most home theaters.

Both models are equipped with JVC’s proprietary Digital Sound Processing technology, which enhances audio quality by optimizing bass and treble levels, ensuring crystal-clear sound reproduction across all frequencies. This feature is particularly useful for home theater enthusiasts who desire a theater-like experience in the comfort of their living room.

For connectivity, the RX-7012RSL and RX-7010RBK are outfitted with a variety of inputs, including HDMI, optical, and coaxial options. This versatility allows users to connect multiple devices, such as Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition audio and video quality. Additionally, both receivers support Dolby Digital and DTS surround sound formats, enabling an immersive listening experience.

In terms of design, these JVC receivers sport a sleek, modern look with an easy-to-read display and intuitive controls. The remote control is user-friendly, giving users quick access to functions like volume control, sound settings, and inputs.

One notable feature of both the RX-7012RSL and RX-7010RBK is their zone control capabilities. This allows users to create separate audio zones in their home, enabling different rooms to enjoy unique audio settings and sources simultaneously.

In summary, the JVC RX-7012RSL and RX-7010RBK home theater receivers combine power, advanced technology, and user-friendly design to deliver exceptional audio performance. With their robust connectivity options and sound processing capabilities, these models are perfect choices for anyone looking to elevate their home entertainment experience.