6. Install rod (7) through holes in bottom pole (6) section and eyebolt (8).
8
7. Insert pole assembly into tank assembly as shown.
6
7
7
6
8
6
1
9
10
IMPORTANT!
DO NOT
OVER TIGHTEN.
8. Carefully place unit on its side, and secure pole bottom (6) to tank as shown, a deep socket is recommended. Upright unit.
NOTE: Keep unnecessary pressure off of the pole assembly when in this position.
WARNING
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE.
NOT FOLLOWING
RECOMMENDATION MAY
RESULT IN BODILY INJURY.
P/N 214326 | 8/98 | 14 |