JVC RX-D206B, RX-D205S manual USB connection, Digital connection, How to install the USB drivers

Page 12

Digital connection

This receiver is equipped with three DIGITAL IN terminals—one digital coaxial terminal and two digital optical terminals.

To reproduce the digital sound, use the digital connection in addition to the analog connection methods described on pages 7 to 9.

Digital coaxial cable (not supplied)

Digital optical cable (not supplied)

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

When the component has a digital coaxial output terminal, connect it to the 1(DVR/DVD) terminal, using a digital coaxial cable (not supplied).

DIGITAL IN

1(DVR/DVD) 2(DBS) 3(VCR)

When the component has a digital optical output terminal, connect it to the 2(DBS) or 3(VCR) terminal, using a digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

USB connection

This receiver is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.

When you connect your PC for the first time, follow the procedure below.

•Remember you cannot send any signal or data to your PC from this receiver.

IMPORTANT:

Check if your PC equipped with the CD-ROM drive is running on Windows® 98 SE*, Windows® Me*, Windows® 2000*, or Windows® XP* and prepare its CD-ROM.

How to install the USB drivers

The following procedure is described using the English version of Windows® XP. If your PC is running on a different version of operation system or language, the screens shown on your PC’s monitor will differ from the ones used in the following procedure.

1.Turn on your PC and start running Windows® 98 SE, Windows® Me, Windows® 2000, or Windows® XP.

•If the PC has been turned on, quit all the applications now running.

2.Turn on the receiver, and select the source as “USB.”

3.Set the volume to minimum.

IMPORTANT:

Always set volume to “0” when connecting or disconnecting other equipment.

4.Connect the unit to the PC using a USB cable (not supplied).

USB

NOTES

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

– 1(DVR/DVD): For DVD recorder or DVD player

– 2(DBS):

For DBS tuner

– 3(VCR):

For VCR

If you connect other components, change the digital input (DIGITAL IN) terminal setting correctly. See “Setting the digital input (DIGITAL IN) terminals—DIGITAL IN 1/2/3” on page 20.

• Select the correct digital input mode. See “Selecting the analog

or digital input mode” on page 12.

USB cable

(not supplied)

PC

• When you want to operate the connected component (except

DBS tuner) using the AV COMPU LINK remote control system

(see pages 32 and 33), connect them also as described on

pages 7 to 9.

• Use “USB series A plug to B plug” cable when connecting.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-D205S / RX-D206B For Customer UseFor Canada/pour Le Canada Declaration of ConformityTable of Contents Remote control Parts identificationDisplay window Front panelBefore Installation Putting batteries in the remote controlChecking the supplied accessories Getting startedConnecting the FM and AM antennas AM antenna connectionFM antenna connection Connecting the speakers Speaker Layout DiagramConnecting the speakers Connecting the powered subwooferConnecting video components If your video components have AV Compu Link terminal‰ Ï Ì Connecting a DBS tuner How to install the USB drivers Connect the unit to the PC using a USB cable not suppliedUSB connection Digital connectionConnecting the power cord USB drivers are installed automaticallyCheck if the drivers are correctly installed Now the PC is ready for playback through the USB connectionTurn on the power Selecting the analog or digital input modeTo turn off the power into standby Basic operationsAdjust the volume Listening with headphonesInitial setting Digital Auto Ex. When Dolby Digital is selectedTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Turning off the sounds temporarilyBasic settings Press SettingPress SET Before you start, rememberBasic setting items Speakers channels number and the sizeSetting the speakers Setting subwoofer information-SUBWOOFERSetting the surround back speakers-S Back OUT Turn Multi JOG to select the appropriate SettingActivating the EX/ES/PLIIx setting- EX/ES/PLIIx Setting the speaker distanceFrom the remote control AutoSetting bass sound Setting subwoofer output-SUBWOOFER OUTSetting the crossover frequency-CROSSOVER Setting the low frequency effect attenuator-LFEUsing the Midnight mode DVD S/CVCR S/C Sound adjustments Basic adjustment itemsOperating procedure Press AdjustPress Sound Press Test again to stop the test toneAdjusting the bass sounds Attenuating the input signal-INPUT ATTAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Tuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround modes Dolby Digital3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes Using the Surround/DSP modes About the DSP modesVirtual Surround Back DTSWhen you select Auto Surround Selecting the Surround/DSP modesAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection Connecting procedure Automatic selection of TV’s input modeAutomatic power on/off One-touch video playOperating other JVC products DVD recorder or DVD player Release STANDBY/ON DVR/DVDDVR/DVD MenuChanging the transmittable signals for operating a TV Operating other manufacturers’ productsRelease STANDBY/ON TV/DBS/CATV Manufacturers’ codes for TVChanging the transmittable signals for operating a VCR Release STANDBY/ON VCRTry to operate your VCR by pressing Manufacturers’ codes for VCRManufacturers’ codes for Catv converter/ DBS tuner Try to operate your DVD player by pressingManufacturers’ codes for DVD player Troubleshooting PowerProblem Possible Cause Solution Remote control TunerSpecifications AmplifierFM tuner IHF AM tunerPage Page Audio Video Control Receiver RX-D206B Mises en garde, précautions et indications diverses English Parts identification Source Master Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components ‰ Ï Ì To left/right audio channel output USB connection Connecting the power cord Basic operations Adjust the volume Turning off the sounds temporarily 0ch 2.1ch 3.0ch 3.1ch 0ch 4.1ch 5.0ch 5.1ch Quick SPK SET SUBWOOFER*1Front SPK*1 Center SPK*1Setting the surround back speakers-S Back OUT Activating the EX/ES/PLIIx setting- EX/ES/PLIIx Surround Setting Midnight Mode Sound adjustments Adjusting the speaker output levels Adjusting the bass sounds Width Tuner operations Selecting the FM reception mode Creating realistic sound fields DTS Introducing the DSP modes Digital Auto Surround is the initial setting Video cable Source RX-D206B Equipment To video input Connecting procedure Operating other JVC products DVD recorder or DVD player Operating other manufacturers’ products 01, 02 Emerson Gold Star Hitachi Mitsubishi STANDBY/ON TV/DBS/CATV Sound Specifications RX-D206B
Related manuals
Manual 45 pages 60.21 Kb

RX-D205S, RX-D206B specifications

The JVC RX-D205S and RX-D206B are two versatile and feature-rich audio receivers designed to deliver high-quality sound experiences for home entertainment enthusiasts. Both models are part of JVC's commitment to providing advanced audio technologies while ensuring user-friendly functionality and connectivity options.

One of the standout features of the RX-D205S and RX-D206B is their multi-channel surround sound capability. Each receiver supports a range of audio formats, including Dolby Digital and DTS, allowing users to enjoy immersive audio experiences whether they're watching movies, playing video games, or listening to music. With built-in amplification, these models deliver powerful audio performance, making them ideal for both small and large rooms.

Connectivity is a significant highlight for both models. They come equipped with a variety of input options, including multiple HDMI ports, optical and coaxial inputs, and analog inputs. This extensive connectivity ensures compatibility with a wide range of devices such as Blu-ray players, gaming consoles, streaming devices, and more. Additionally, the receivers support 4K Ultra HD passthrough, ensuring that users can enjoy high-resolution video content without compromising on audio quality.

Another key feature is their user-friendly interface and remote control, allowing users to navigate settings, adjust volume levels, and switch between input sources effortlessly. Both models also incorporate Bluetooth technology, enabling wireless streaming from smartphones and tablets. This feature enhances convenience, allowing users to easily enjoy their favorite playlists or podcasts directly from their mobile devices.

In terms of design, the RX-D205S and RX-D206B boast a sleek and modern aesthetic, making them fitting additions to any home entertainment setup. They are designed for durability and longevity, with high-quality components that contribute to their excellent sound performance.

In summary, the JVC RX-D205S and RX-D206B are impressive audio receivers that combine innovative technologies with practical features. Their multi-channel support, versatile connectivity options, Bluetooth capability, and robust design make them excellent choices for anyone seeking to upgrade their home audio system and enjoy an elevated entertainment experience. Whether for casual listening or cinematic immersion, these receivers deliver powerful performance and ease of use, establishing them as noteworthy contenders in the world of home audio.
Top Page Image Contents