JVC RX-D206B, RX-D205S manual Connecting video components

Page 54

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

English

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get better picture quality in the order:

Component > S-video > Composite

IMPORTANT:

The video signals from one type of these input jacks are transmitted only through the video output jacks of the same type. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 32 for detailed information about the connection and the AV COMPU LINK remote control system.

7 Connecting a DVD recorder or DVD player

COMPONENT

VIDEO

 

Green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YBlue

PBRed

PR

VCR(DBS)

DVR/DVD

MONITOR

IN

IN

OUT

DVR

DVR/DVD

White

OUT(REC)

IN(PLAY)

Red

DVR DVR/DVD

OUT(REC) IN(PLAY)

Red

White

S-video cable (not supplied)

Component video cable (not supplied)

Å

DVD recorder or DVD player

ıÇ Î ‰ Ï Ì

Stereo audio cable (not supplied)

Composite video cable (not supplied)

Composite video cable (not supplied)

NOTES

•When connecting a DVD recorder or DVD player to the component video input jacks, select the component video input mode (DVD VIDEO IN) correctly. If you do not, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly. See page 20 for details.

•When using a stereo audio cable as the illustration above, set the audio input mode to “ANALOG.” For details, see “Selecting the analog or digital input mode” on page 12.

•You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the digital input terminal setting for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital connection, see page 10.

ÅTo component video output

•Connect Y, PB, and PR correctly. ı To left/right audio channel output

Ç Only for DVD recorder: To left/right audio channel input

Î To composite video output ‰ To S-video output

Ï Only for DVD recorder: To S-video input

Ì Only for DVD recorder: To composite video input

7

Page 53 Page 55
Image 54
Page 53 Page 55
Contents RX-D205S / RX-D206B For Customer UseFor Canada/pour Le Canada Declaration of ConformityTable of Contents Remote control Parts identificationDisplay window Front panelChecking the supplied accessories Before InstallationPutting batteries in the remote control Getting startedConnecting the FM and AM antennas AM antenna connectionFM antenna connection Connecting the speakers Connecting the speakersSpeaker Layout Diagram Connecting the powered subwooferConnecting video components If your video components have AV Compu Link terminal‰ Ï Ì Connecting a DBS tuner USB connection How to install the USB driversConnect the unit to the PC using a USB cable not supplied Digital connectionCheck if the drivers are correctly installed Connecting the power cordUSB drivers are installed automatically Now the PC is ready for playback through the USB connectionTo turn off the power into standby Turn on the powerSelecting the analog or digital input mode Basic operationsInitial setting Digital Auto Adjust the volumeListening with headphones Ex. When Dolby Digital is selectedSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory Turning off the sounds temporarilyPress SET Basic settingsPress Setting Before you start, rememberBasic setting items Speakers channels number and the sizeSetting the surround back speakers-S Back OUT Setting the speakersSetting subwoofer information-SUBWOOFER Turn Multi JOG to select the appropriate SettingFrom the remote control Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance AutoSetting the crossover frequency-CROSSOVER Setting bass soundSetting subwoofer output-SUBWOOFER OUT Setting the low frequency effect attenuator-LFEUsing the Midnight mode DVD S/CVCR S/C Operating procedure Sound adjustmentsBasic adjustment items Press AdjustPress Sound Press Test again to stop the test toneAdjusting the virtual room size for DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone To store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationIntroducing the Surround modes Creating realistic sound fieldsReproducing theater ambience Dolby Digital3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes Virtual Surround Back Using the Surround/DSP modesAbout the DSP modes DTSWhen you select Auto Surround Selecting the Surround/DSP modesAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection Automatic power on/off Connecting procedureAutomatic selection of TV’s input mode One-touch video playOperating other JVC products DVR/DVD DVD recorder or DVD playerRelease STANDBY/ON DVR/DVD MenuRelease STANDBY/ON TV/DBS/CATV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Manufacturers’ codes for TVTry to operate your VCR by pressing Changing the transmittable signals for operating a VCRRelease STANDBY/ON VCR Manufacturers’ codes for VCRManufacturers’ codes for Catv converter/ DBS tuner Try to operate your DVD player by pressingManufacturers’ codes for DVD player Problem Possible Cause Solution TroubleshootingPower Remote control TunerFM tuner IHF SpecificationsAmplifier AM tunerPage Page Audio Video Control Receiver RX-D206B Mises en garde, précautions et indications diverses English Parts identification Source Master Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components ‰ Ï Ì To left/right audio channel output USB connection Connecting the power cord Basic operations Adjust the volume Turning off the sounds temporarily 0ch 2.1ch 3.0ch 3.1ch 0ch 4.1ch 5.0ch 5.1ch Front SPK*1 Quick SPK SETSUBWOOFER*1 Center SPK*1Setting the surround back speakers-S Back OUT Activating the EX/ES/PLIIx setting- EX/ES/PLIIx Surround Setting Midnight Mode Sound adjustments Adjusting the speaker output levels Adjusting the bass sounds Width Tuner operations Selecting the FM reception mode Creating realistic sound fields DTS Introducing the DSP modes Digital Auto Surround is the initial setting Video cable Source RX-D206B Equipment To video input Connecting procedure Operating other JVC products DVD recorder or DVD player Operating other manufacturers’ products 01, 02 Emerson Gold Star Hitachi Mitsubishi STANDBY/ON TV/DBS/CATV Sound Specifications RX-D206B
Related manuals
Manual 45 pages 60.21 Kb

RX-D205S, RX-D206B specifications

The JVC RX-D205S and RX-D206B are two versatile and feature-rich audio receivers designed to deliver high-quality sound experiences for home entertainment enthusiasts. Both models are part of JVC's commitment to providing advanced audio technologies while ensuring user-friendly functionality and connectivity options.

One of the standout features of the RX-D205S and RX-D206B is their multi-channel surround sound capability. Each receiver supports a range of audio formats, including Dolby Digital and DTS, allowing users to enjoy immersive audio experiences whether they're watching movies, playing video games, or listening to music. With built-in amplification, these models deliver powerful audio performance, making them ideal for both small and large rooms.

Connectivity is a significant highlight for both models. They come equipped with a variety of input options, including multiple HDMI ports, optical and coaxial inputs, and analog inputs. This extensive connectivity ensures compatibility with a wide range of devices such as Blu-ray players, gaming consoles, streaming devices, and more. Additionally, the receivers support 4K Ultra HD passthrough, ensuring that users can enjoy high-resolution video content without compromising on audio quality.

Another key feature is their user-friendly interface and remote control, allowing users to navigate settings, adjust volume levels, and switch between input sources effortlessly. Both models also incorporate Bluetooth technology, enabling wireless streaming from smartphones and tablets. This feature enhances convenience, allowing users to easily enjoy their favorite playlists or podcasts directly from their mobile devices.

In terms of design, the RX-D205S and RX-D206B boast a sleek and modern aesthetic, making them fitting additions to any home entertainment setup. They are designed for durability and longevity, with high-quality components that contribute to their excellent sound performance.

In summary, the JVC RX-D205S and RX-D206B are impressive audio receivers that combine innovative technologies with practical features. Their multi-channel support, versatile connectivity options, Bluetooth capability, and robust design make them excellent choices for anyone seeking to upgrade their home audio system and enjoy an elevated entertainment experience. Whether for casual listening or cinematic immersion, these receivers deliver powerful performance and ease of use, establishing them as noteworthy contenders in the world of home audio.
Top Page Image Contents