JVC RX-D205S manual Sound adjustments, Basic adjustment items, Operating procedure, Press Adjust

Press ADJUST.

The source indication resumes on the display.

7

Your adjustment is stored.

5 Press SET.

6 Repeat steps 2 to 5 to adjust other items if necessary.

ANALOG

The current setting for the selected item appears.

ANALOG

SUBWFR LVL

FRONT R LVL

SURR L LVL

S BACK LVL S BACK R LVL D EQ 250Hz D EQ 4kHz

BASS BOOST EFFECT LIVENESS CENTER WIDTH CENTER GAIN CENTER ALIGN

Sound adjustments

You can make sound adjustment to your preference after completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which are not available with the current setting.

Items	To do
SUBWFR LVL*1	Adjust the subwoofer output level. (22)
FRONT L LVL*1*2	Adjust the left front speaker output level. (22)
FRONT R LVL*1*2	Adjust the right front speaker output level. (22)
CENTER LVL*1*2	Adjust the center speaker output level. (22)
SURR L LVL*1*2	Adjust the left surround speaker output level.
	(22)
SURR R LVL*1*2	Adjust the right surround speaker output
	level. (22)
S BACK LVL*1*2	Adjust the surround back speaker output
	level. (22)
S BACK L LVL*1*2	Adjust the left surround back speaker output
	level. (22)
S BACK R LVL*1*2	Adjust the right surround back speaker
	output level. (22)
D EQ 63Hz*1	Adjust the equalization pattern of each
D EQ 250Hz*1	band. (22)
D EQ 1kHz*1
D EQ 4kHz*1
D EQ 16kHz*1
BASS BOOST	Boost the bass level. (23)
INPUT ATT	Attenuate the input level of analog source. (23)
EFFECT*1	Adjust the effect level. (23)
ROOM SIZE	Select the room size for your virtual listening
	room. (23)
LIVENESS	Select the liveness level for your virtual
	listening room. (23)
PANORAMA	Add “wraparound” sound effect with side-
	wall image. (23)
CENTER WIDTH	Adjust the center channel localization
	between the center speaker and the left/
	right speakers. (24)
DIMENSION	Adjust sound localization pattern. (24)
CENTER GAIN	Adjust the sound localization of the center
	channel. (24)
CENTER TONE*1	Make the center tone soft or sharp. (24)
CENTER ALIGN	Align the vertical localization of the center
	channel signals. (24)

*1 You can also use the remote control for the adjustment.

*2 If you have used Quick Speaker Setup on page 15, these settings are not required.

Operating procedure

1,7 3,5 2,4

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When adjusting subwoofer output level.

1Press ADJUST.

MULTI JOG now works for the sound adjustment.

2Turn MULTI JOG until the item you want to adjust appears on the display.

•As you turn MULTI JOG, the adjustment items change as follows:

ANALOG

LR

S.WFR

FRONT L LVL

CENTER LVL

SURR R LVL

S BACK L LVL

D EQ 63Hz

D EQ 1kHz

D EQ 16kHz

INPUT ATT

ROOM SIZE

PANORAMA

DIMENSION

CENTER TONE

(Back to the beginning)

3Press SET.

LR

S.WFR

4Turn MULTI JOG to adjust the selected item.

LR

S.WFR

–10 0+10

21