JVC RX-D205S, RX-D206B manual Specifications

Page 87

English

Specifications

Designs and specifications are subject to change without notice.

Amplifier

Output Power

At stereo operation:

 

Front channels:

110 W per channel, min. RMS, driven

 

into 6 Ω at 20 Hz to 20 kHz with no

 

more than 0.8% total harmonic

 

distortion.

At surround operation:

 

Front channels:

110 W per channel, min. RMS, driven into

 

6 Ω at 1 kHz with no more than 0.8% total

 

harmonic distortion.

Center channel:

110 W, min. RMS, driven into 6 Ω at 1 kHz,

 

with no more than 0.8% total harmonic

 

distortion.

Surround channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Surround back channels:

110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Audio

Audio Input Sensitivity/Impedance:

DVR/DVD, VCR, DBS, TV:

300 mV/47 kΩ

Audio Input (DIGITAL IN)*:

Coaxial: DIGITAL IN 1(DVR/DVD):

0.5 V(p-p)/75 Ω

Optical: DIGITAL IN 2(DBS), 3(VCR):

–21 dBm to –15 dBm (660 nm ±30 nm)

USB: USB DIGITAL

*Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

 

 

DVR, VCR:

300 mV

Signal-to-Noise Ratio (’66 IHF/’78 IHF):

80 dB/70 dB

Frequency Response (6 Ω):

20

Hz to 20 kHz (±1 dB)

Bass Boost:

+4 dB ±1 dB at 100 Hz

Equalization (at DSP operation):

Center frequency:

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz

Control range:

±8 dB

Video

Video Input Sensitivity/Impedance:

Composite video: DVR/DVD, VCR, DBS:

 

1 V(p-p)/75 Ω

S-video: DVR/DVD, VCR, DBS:

 

Y (luminance):

1 V(p-p)/75 Ω

C (chrominance, burst):

0.286 V(p-p)/75 Ω

Component: DVR/DVD, VCR (DBS):

Y (luminance):

1 V(p-p)/75 Ω

PB, PR:

0.7 V(p-p)/75 Ω

Video Output Level/Impedance:

 

Composite video: DVR, VCR, MONITOR OUT:

 

1 V(p-p)/75 Ω

S-video: DVR, VCR, MONITOR OUT:

Y (luminance):

1 V(p-p)/75 Ω

C (chrominance, burst):

0.286 V(p-p)/75 Ω

Component: MONITOR OUT:

 

Y (luminance):

1 V(p-p)/75 Ω

PB, PR:

0.7 V(p-p)/75 Ω

Synchronization:

Negative

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

Usable Sensitivity:

 

Monaural:

12.8 dBf (1.2 μV/75 Ω)

50 dB Quieting Sensitivity:

 

Monaural:

16.0 dBf (1.7 μV/75 Ω)

Stereo:

37.5 dBf (20.5 μV/75 Ω)

Stereo Separation at REC OUT:

35 dB at 1 kHz

AM tuner

Tuning Range:530 kHz to 1 710 kHz

General

Power Requirements:

AC 120 V , 60 Hz

Power Consumption:

150 W/200 VA (at operation)

0.9W (in standby mode)

Dimensions (W x H x D): 435 mm x 91.5 mm x 360 mm

Mass:

6.7 kg

40

Page 86 Page 88
Image 87
Page 86 Page 88
Contents For Customer Use RX-D205S / RX-D206BDeclaration of Conformity For Canada/pour Le CanadaTable of Contents Parts identification Remote controlFront panel Display windowGetting started Before InstallationPutting batteries in the remote control Checking the supplied accessoriesConnecting the FM and AM antennas AM antenna connectionFM antenna connection Connecting the powered subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the speakersIf your video components have AV Compu Link terminal Connecting video components‰ Ï Ì Connecting a DBS tuner Digital connection How to install the USB driversConnect the unit to the PC using a USB cable not supplied USB connectionNow the PC is ready for playback through the USB connection Connecting the power cordUSB drivers are installed automatically Check if the drivers are correctly installedBasic operations Turn on the powerSelecting the analog or digital input mode To turn off the power into standbyEx. When Dolby Digital is selected Adjust the volumeListening with headphones Initial setting Digital AutoTurning off the sounds temporarily Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayBefore you start, remember Basic settingsPress Setting Press SETSpeakers channels number and the size Basic setting itemsTurn Multi JOG to select the appropriate Setting Setting the speakersSetting subwoofer information-SUBWOOFER Setting the surround back speakers-S Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance From the remote controlSetting the low frequency effect attenuator-LFE Setting bass soundSetting subwoofer output-SUBWOOFER OUT Setting the crossover frequency-CROSSOVERUsing the Midnight mode DVD S/CVCR S/C Press Adjust Sound adjustmentsBasic adjustment items Operating procedurePress Test again to stop the test tone Press SoundAdjusting the liveness effect for DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the virtual room size for DSP modesAdjusting the center tone-CENTER Tone Tuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeDolby Digital Creating realistic sound fieldsReproducing theater ambience Introducing the Surround modes3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes DTS Using the Surround/DSP modesAbout the DSP modes Virtual Surround BackSelecting the Surround/DSP modes When you select Auto SurroundAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection One-touch video play Connecting procedureAutomatic selection of TV’s input mode Automatic power on/offOperating other JVC products Menu DVD recorder or DVD playerRelease STANDBY/ON DVR/DVD DVR/DVDManufacturers’ codes for TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Release STANDBY/ON TV/DBS/CATVManufacturers’ codes for VCR Changing the transmittable signals for operating a VCRRelease STANDBY/ON VCR Try to operate your VCR by pressingManufacturers’ codes for Catv converter/ DBS tuner Try to operate your DVD player by pressingManufacturers’ codes for DVD player Remote control Tuner TroubleshootingPower Problem Possible Cause SolutionAM tuner SpecificationsAmplifier FM tuner IHFPage Page Audio Video Control Receiver RX-D206B Mises en garde, précautions et indications diverses English Parts identification Source Master Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components ‰ Ï Ì To left/right audio channel output USB connection Connecting the power cord Basic operations Adjust the volume Turning off the sounds temporarily 0ch 2.1ch 3.0ch 3.1ch 0ch 4.1ch 5.0ch 5.1ch Center SPK*1 Quick SPK SETSUBWOOFER*1 Front SPK*1Setting the surround back speakers-S Back OUT Activating the EX/ES/PLIIx setting- EX/ES/PLIIx Surround Setting Midnight Mode Sound adjustments Adjusting the speaker output levels Adjusting the bass sounds Width Tuner operations Selecting the FM reception mode Creating realistic sound fields DTS Introducing the DSP modes Digital Auto Surround is the initial setting Video cable Source RX-D206B Equipment To video input Connecting procedure Operating other JVC products DVD recorder or DVD player Operating other manufacturers’ products 01, 02 Emerson Gold Star Hitachi Mitsubishi STANDBY/ON TV/DBS/CATV Sound Specifications RX-D206B
Related manuals
Manual 45 pages 60.21 Kb

RX-D205S, RX-D206B specifications

The JVC RX-D205S and RX-D206B are two versatile and feature-rich audio receivers designed to deliver high-quality sound experiences for home entertainment enthusiasts. Both models are part of JVC's commitment to providing advanced audio technologies while ensuring user-friendly functionality and connectivity options.

One of the standout features of the RX-D205S and RX-D206B is their multi-channel surround sound capability. Each receiver supports a range of audio formats, including Dolby Digital and DTS, allowing users to enjoy immersive audio experiences whether they're watching movies, playing video games, or listening to music. With built-in amplification, these models deliver powerful audio performance, making them ideal for both small and large rooms.

Connectivity is a significant highlight for both models. They come equipped with a variety of input options, including multiple HDMI ports, optical and coaxial inputs, and analog inputs. This extensive connectivity ensures compatibility with a wide range of devices such as Blu-ray players, gaming consoles, streaming devices, and more. Additionally, the receivers support 4K Ultra HD passthrough, ensuring that users can enjoy high-resolution video content without compromising on audio quality.

Another key feature is their user-friendly interface and remote control, allowing users to navigate settings, adjust volume levels, and switch between input sources effortlessly. Both models also incorporate Bluetooth technology, enabling wireless streaming from smartphones and tablets. This feature enhances convenience, allowing users to easily enjoy their favorite playlists or podcasts directly from their mobile devices.

In terms of design, the RX-D205S and RX-D206B boast a sleek and modern aesthetic, making them fitting additions to any home entertainment setup. They are designed for durability and longevity, with high-quality components that contribute to their excellent sound performance.

In summary, the JVC RX-D205S and RX-D206B are impressive audio receivers that combine innovative technologies with practical features. Their multi-channel support, versatile connectivity options, Bluetooth capability, and robust design make them excellent choices for anyone seeking to upgrade their home audio system and enjoy an elevated entertainment experience. Whether for casual listening or cinematic immersion, these receivers deliver powerful performance and ease of use, establishing them as noteworthy contenders in the world of home audio.
Top Page Image Contents