Dimension One Spas 2003 manual AquaFitDual Temp Spa-Side, High temperature condition

Aquatic Fitness System

2003 Owner’s Manual

Symptom (Cont)	Problem	Corrective Action
		No action required unless the water
	High temperature condition:	temperature fails to return to acceptable
		levels – in which case, call your dealer for
	Do not enter the spa water. The water
		service.
	temperature is above acceptable limits.
	Water temperature has reached 110°F
	(43.3°C.) The air blower and low speed
	pump are activated to assist in lowering
	water temperature.
		Call your dealer for service.
	High limit condition:
	Do not enter the spa water.
	The water temperature has reached 118°F
	(47.8°C.) The entire system is disabled.

AquaFit™Dual Temp (Spa-Side)

Symptom		Problem		Corrective Action
		“OH” on LED Digital Display		1. Remove the cover and allow the
		Window
				water to cool.
		High Temperature Condition:		2. Reset the power to the spa by
				resetting the GFCI breaker.
		Do not enter spa water. The water
		temperature is above acceptable limits.		No further action is required unless the
		The water temperature has reached
				water temperature fails to return to
		110°F (43.3°C.). The system will shut
				acceptable levels – in which case, call
		down.
				your dealer for service.
		3 Flashing Lights AND
		“OH” on LED Digital Display		Call your dealer for service.
		Window
		High Limit Condition:
		Do not enter spa water. The water
		temperature is above acceptable limits.
		The water temperature has reached
		118°F (47.8°C.). The system will shut
		down.
		3 Flashing Lights		If the error is not resolved after
		System Error:		resetting the spa, call your dealer for
				service.
	1.		Check the water level
	2.		Clean the filters.
	3.		If the problem persists, reset the
			power to the spa by resetting the
			GFCI breaker.

37