Dimension One Spas 2003 manual Lockout Mode, Temperature display flashes in this function

Page 20

Aquatic Fitness System

2003 Owner’s Manual

Lockout Mode

LOCKOUT – This special feature can be used when cleaning or changing the filter cartridge, or when doing any type of non-electrical servicing that requires the pump operation to be suspended while the work is completed.

To select Lockout Mode L1, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see L1 displayed in the window.

You have now successfully selected Lockout Mode. The programming mode will automatically store your choice and exit if you don’t make another change within three (3) more seconds.

The temperature display flashes in this function.

If the control is heating when the system is put into the lockout mode, the heater will immediately turn off and the pump will cycle water for thirty seconds, then turn off. This will assist in cooling the heat element

PANEL LOCKOUT – Special feature to prevent unauthorized use of your spa. The Top Side Control incorporates a unique panel locking system that disables the control buttons on the panel.

To select Panel Lockout L2, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see L2 displayed in the window.

You have now successfully selected Panel Lockout. The programming mode will automatically store your choice and exit if you don’t make another change within three (3) more seconds.

The temperature display flashes in this function.

In this mode the system will only operate as if the filter cycle had been set to F1.

16

Image 20
Contents Page Aquatic Fitness System Table of Contents Draining Your Aquatic Fitness System Important Safety Instructions Read and Follow ALL Instructions CarefullyFollowing strenuous exercise Aquatic Fitness System Hyperthermia Do’s Don’tsDimension One Spas, Inc Aquatic Fitness System Features HydroTherapy JetsSwim Jets HydroSport Aquatic Fitness GearRowing Seat Swim Tether MountsBuilt-in OptiMounts Multiple Training StationsAquatic Fitness System Equipment Pack Before you Start Using Your Aquatic Fitness SystemUsing The Top Side Control Temperature Set Buttons Jets 1 ButtonLED Display Window Jets 2 and Jets 3 ButtonsLight Button Programming the Filtration Cycle FiltrationStandard Mode Filter CyclesEconomy Mode Lockout Mode Temperature display flashes in this functionAdditional Features Following features are included on your hot tubSpa Included Heater and Circulation Pump ControlOperation of the Spa AquaFit Dual Temp LED Digital Display WindowJets Button Up and Down Buttons Program the Filter Cycle Duration by pressing the Program Program ButtonProgram the Filter Cycle Start Time by pressing Temperature Unit Heat Indicator LightHeat Indicator Light Dimension One Spas Icon Logo ButtonFlashing LED on the Control Panel Digital Display MessagesOH Overheat Protection Display Flashing Temperature onDo not Enter the Water if you see a flashing Routine Equipment Maintenance Filter CleaningDraining Your Aquatic Fitness System SPA AquaFit Dual Temp OnlyLight Bulb Replacement Care for the Wood Spa Cabinet Dimension One EnviroTect Skirts and Vinyl CoversSurface Care Shell Items Required for Winterizing Procedure for WinterizingSpecial Cold Weather Instructions Aquatic Fitness System Replace all equipment access panels onto the system Spring Time StartupWarranty Service Information Do not block the air intakesUsed to drain your Aquatic Fitness System Glossary of TermsAquatic Fitness System is heating Light Skimmer Door Aquatic Fitness System side control panelTroubleshooting Guide Heating SystemElectrical System Water SystemSelf-Diagnostic Control System AquaFit, AquaFitDual Temp Pool-Side, AquaProHigh temperature condition AquaFitDual Temp Spa-SideTemperature Probe Failure Call the dealer for service