Weider 831.150390 user manual

Page 8

8.Insert the Upper Lat Tower (41) into the Lower Lat Tower (46). Fully tighten the M10 x 63mm Bolt (6) into the Lower Lat Tower.

Slide a Weight Stop (19) onto each side of the Weight Carriage (56).

9.Wrap the Cable (32) around a Pulley (45). Attach the Pulley to the Upper Lat Tower (41) with an M10

x70mm Bolt (2), two M10 Washers (16), two 14mm

x15mm Spacers (14), and an M10 Nylon Locknut (12).

Attach the other Pulley (45) to the Upper Lat Tower (41) in the same manner.

Attach the indicated end of the Cable (32) to the eyebolt on the Weight Carriage (56).

8

8
	41
			19
19			56
6			46
			46
9	45		12
	45

			14
			16
		16	45
		16
	2
	32		41
			41
	56

Image 8

Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL Patent PendingModel No Serial No Table of Contents Full 90 DAY WarrantyImportant Precautions Before YOU Begin Assembly Following Tools not Included are Required for AssemblyNylon Locknuts yet Locknut yetNylon Locknut yet Locknuts yet Tighten all Nylon Locknuts used in steps 1-5 nowPage Page Page Page Adjusting the Weider PRO Attaching Weights to the Weight CarriageAttaching Weights to the LEG Lever Adjusting the BackrestSetting the Adjustment Weight Rests Attaching the LAT BAR to the High Pulley StationExercise Guidelines Cooling Down Staying MotivatedMuscle Chart Date Exercise Weight Sets RepsAerobic Exercise Weight Sets Reps Part LIST-Model No Key Part Qty DescriptionExploded DRAWING-Model No Page Page QUESTIONS? Model No