Seat Assembly
50.Locate and open the parts bag labeled “SEAT ASSEMBLY.”
Attach the Backrest (12) to the indicated holes in the Butterfly Upright (1) with two 1/4” x 2 1/2” Bolts (79) and two 1/4” Flat Washers (71).
51.Insert a 1/4” x 2 1/2” Carriage Bolt (45) through the center hole in a Seat Plate (65). Attach the Seat Plate to the Press Backrest (99) with two 1/4” x 3/4” Bolts (49).
Insert the 1/4” x 2 1/2” Carriage Bolt (45) into the indicated hole in the Butterfly Upright (2) and secure it with a 1/4” Flat Washer (71) and a 1/4” Nylon Locknut (68). Secure the other end of the Press Backrest (99) with a 1/4” x 2 1/2” Bolt (79) and a 1/4” Flat Washer (71).
20
50 |
|
|
| 1 |
|
|
| 79 |
12 |
| 71 |
|
| |
|
| 79 |
51 |
|
|
|
| 2 |
|
| 79 |
|
| 71 |
99 |
|
|
65 | 49 | 68 |
|
| 71 |
45 |
|
|