Weider 9940 user manual Weider

Page 22

56.Apply the WEIDER PRO 9940 decal in the location shown. Important: The warning decals shown below have been attached to the home gym in the locations shown. If a decal is missing or illegible, please call our customer hotline at the number on the front cover of this manual to order a replacement decal. Apply the new decal in the appropriate location.

56

WEIDER

PRO 9940

57.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 25 of this manual.

Before using the home gym, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See TROUBLE- SHOOTING AND MAINTENANCE on page 26.

22

Image 22

Contents QUESTIONS? Model No. WESY97310 Serial NoTable of Contents Important PrecautionsDimensions Before You BeginAssembly Four Stages of the Assembly ProcessFrame Assembly Locknuts yetPage Locknuts yet Nylon Locknuts yet Nylon Locknut the Leg Press Lever must pivot easilyGroove fits over the welded pin on the Weight Tube Nylon Locknuts 50. Do not tighten the Nylon Locknuts yetArm Assembly Locate and open the parts bag labeled ARM AssemblyCable Assembly Large Cable Trap is oriented as shownSmall Pulley Bracket is oriented exactly as shown Bracket is oriented as shown Pulley Plates are oriented as shownMake sure the Cable Trap is oriented as shown Page Remove a Pro Pulley 26 from the bag labeled Pulley BAG Cable Trap is oriented as shownPulley and the welded pin on the Press Top Frame Page Make sure the Cable Trap is oriented as shown Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyMiscellaneous Assembly Leg Press Plate must be on the upper edgeWeider Cable Diagrams Press Cable Adjustment Changing the Weight SettingsTrouble-shooting and Maintenance Tightening the CablesPress Lbs Weight Resistance ChartHigh Arm Leg Butterfly Curl Ab Pulley Leg RaisePart Identification Chart-Model No. WESY97310 R0601A Page Page Part List-Model No. WESY97310 Qty DescriptionDrawing Ordering Replacement Parts Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT