Weider 8510 user manual Cable Diagram, Long Cable 23 TOP View, Short Cable

Page 20

CABLE DIAGRAM

The cable diagram below shows the proper routing of the Short Cable (58) and the Long Cable (23). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. The numbers show the correct route for each cable. The starting and ending points of each cable are labeled. Be sure that the cable traps do not touch or bind the cables.

2

1ÑHigh Pulley

7

5

6

3

4

Long Cable (23) TOP VIEW

5ÑLong ÒUÓ-Bracket

Short Cable (58)

Weight StackÑ8

4

3

1ÑLow Pulley

2

20

Image 20

Contents QUESTIONS? Model No. WESY85101 Serial NoCustomer HOT Line Patent PendingTable of Contents Limited WarrantyImportant Precautions Assembled Dimensions Before YOU BeginFollowing Tools not Included are Required for Assembly AssemblyChart located in the center of this manual Nylon Locknuts yet Tighten all Nylon Locknuts used in steps 1 throughPlastic Bushings should fit onto each end Indicated tube in the Base. Be sureThat the pulleys are on the indicated side ARMOn each Arm. Arm identification is very Important for stepArm with the Left Arm 47 refer to step To identify the Right Arm. Be sure thatCable Assembly Cable Assembly Crossbar Inset shows view From other sideCable Assembly Pivot freely Locknut 3. Do not overtighten the NylonLocknut. The Leg Lever must be able to Seat Assembly High Pulley Butterfly Adjustment Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Weight Resistance ChartAttaching and Removing the Seat TROUBLE-SHOOTING and Maintenance Tightening the CablesShort Cable Cable DiagramLong Cable 23 TOP View Page Part LISTÑModel No. WESY85101 Key No. Qty DescriptionExploded DRAWINGÑModel No. WESY85101 Page Page Page Ordering Replacement Parts