Weider 8530 manual

Page 24

1/4" Nylon Locknut (2)Ð4

5/16" Nylon Locknut (3)Ð27

3/8" Nylon Locknut (21)Ð16

3/8" Jam Nut (92)Ð2

1/4" Flat Washer (10)Ð13

5/16" Flat Washer (8)Ð7

3/8" Flat Washer (9)Ð4

3/8" x 1 3/4" Bolt (24)Ð2

1/4" x 2" Carriage Bolt (38)Ð1

1/4" x 2" Machine Screw (81)Ð5

5/16" x 2 1/2" Bolt (22)Ð6

3/8" x 2" Bolt (12)Ð6

5/16" x 2 1/4" Bolt (33)Ð1

1/4" x 2 1/2" Screw (43)Ð4

5/16" x 2 1/2" Carriage Bolt (1)Ð6

3/8" x 2 1/2" Bolt (86)Ð3

5/16" x 2 3/4" Bolt (11)Ð6

5/16" x 2 3/4" Carriage Bolt (14)Ð1

5/16" x 3" Bolt (75)Ð2

3/8" x 5" Bolt (67)Ð1

Image 24

Contents QUESTIONS? Model No. WESY85301 Serial NoCustomer HOT Line Mon.ÐFri., 6 a.m.Ð6 p.m. MSTTable of Contents Important PrecautionsDimensions Before YOU BeginAssembly Frame AssemblyChart located in the center of this manual Following Tools not Included are Required for AssemblyNylon Locknuts yet Tighten all of the Nylon Locknuts used in steps 1Ð3Tube are sitting in the pin grooves in the top Weight Frame Assembly ARM Assembly On each Arm. Arm identification is very Important for stepRight Arm is behind the indicated bracket On the Top FrameCable Assembly Be sure that the ball is on the indicated3/8Ó Nylon Locknut Locate the Short Cable 23. Route Be sure that the end of the Cable withPulley and the crossbar on the Press Cable Assembly Cable Trap is turned to hold the Cable in place Cable Assembly Seat Assembly Insets show viewFrom other side Seat Assembly VKR Assembly VKR Assembly Decals HOW to USE the Home GYM System Changing the Weight SettingWeight Resistance Chart Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station TROUBLE-SHOOTING and Maintenance Tightening the CablesTightening the Medium and Short Cables Tightening the Long CableCable Diagram TOP ViewPart LISTÑModel No. WESY85301 Qty Description Exploded Page 2 Inner Cap 32Ð4 Inner Cap 27Ð5 Outer Cap 51Ð2 Page Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT