Weider 8530 manual Right Arm is behind the indicated bracket, On the Top Frame

ARM ASSEMBLY

11.	Lubricate both axles on the Top Frame (55).	11
	Slide the Right Arm (48) onto the right axle.		55	Bracket			47
	Be careful not to confuse the Right Arm
	with the Left Arm (47); note the position of
	the ÒVÓ Pulley (50) to identify the Right
	Arm. Be sure that the upper end of the				AxleÑ
	Right Arm is behind the indicated bracket
					Lubricate
	on the Top Frame (55).
			50
	Tap two 1Ó Retainers (69) and a 1Ó Round
	Cover Cap (70) onto the axle. Be sure that				69
	the teeth on the Retainers bend toward the
	Round Cover Cap, as shown in the inset				70
	drawing.					45
	Attach the Left Arm (47) in the same manner.			48			44
	Press 1 3/4Ó Inner Caps (44) into the lower
	ends of the Left and Right Arms (47, 48). Wet
	the lower end of each Arm with soapy water.
	Slide a 10Ó Pad (45) onto the lower end of	44
	each Arm.	45					55ÑAxle
							69
							70
12.	Press two 1Ó x 2Ó Inner Caps (87) into the	12
	indicated end of the Squat Arm (84).
	Attach the Squat Arm (84) to the VKR Upright		83	82	22	85
	(74) with a 3/8Ó x 5 1/2Ó Bolt (93) and a 3/8Ó
	Nylon Locknut (21). Be sure that the indicat-						87
	ed bracket is pointing down as shown.			8		49
							82
	Wet the ends of the Squat Arm (84) with				91
				3
	soapy water. Slide the two Squat Arm Pads
	(85) onto the Squat Arm.						85
	Attach a Handle (82) to one side of the Squat	21			84
			Bracket
	Arm (84) with a 5/16Ó x 2 1/2Ó Bolt (22), two
	5/16Ó Flat Washers (8), a 1/2Ó x 17/32Ó Spacer
	(91), and a 5/16Ó Nylon Locknut (3).		93
	Wet the Handle (82) with soapy water. Slide a
	5Ó Plastic Grip (83) onto the Handle. Press a	74
	1Ó Round Inner Cap (49) into the other end of
	the Handle.
	Assemble another Handle (82) to the other
	side of the Squat Arm (84) in the same man-
	ner.

8