9.Attach the Bumper (39) to the Curl Bar (17) with an M4 x 19mm Screw (54).
Attach the Curl Bar (17) to the Leg Lever (5) with the Pin/Tether (35). Then, attach the Tether to the Leg Lever with an M4 x 19mm Screw (54).
10.Attach the Curl Pad (20) to the Curl Post (6) with two M6 x 20mm Screws (53).
11.Identify the Left Upright (11) by observing the positions of the indicated holes. Orient one of the Bases (9) as shown. Attach the Base to the Left Upright with two M10 x 90mm Carriage Bolts (43) and two M10 Nylon Locknuts (42).
Attach the Right Upright (10) to the other Base (9) in the same way.
9 |
|
| 17 |
| 39 |
| 54 |
| 5 |
| 54 |
| 35 |
10 | 20 |
| |
| 6 |
| 53 |
11 |
|
| 10 |
| 11 |
| Holes |
|
9 | Holes | 42 |
|
| |
| 42 |
|
| 9 |
|
Warning
Decals
43
9