Weider 831.159720 user manual Weider

Page 18

39.Apply the WEIDER PRO 9930 decal in the location shown.

39

WEIDER

PRO 9930

40.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 21 of this manual.

Before using the home gym, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See TROUBLE- SHOOTING AND MAINTENANCE on page 22.

18

Image 18

Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions Dimensions Before You BeginAssembly Four Stages of the Assembly ProcessFrame Assembly Nylon Locknuts yetPage Do not tighten the Nylon Locknuts yet Arm Assembly Locate and open the parts bag labeled ARM AssemblyNylon Locknut. The Press Frame must pivot easily Cable Assembly Do not overtighten the Nylon Jam NutsTrap and Pulley Plates are oriented as shown Page Page Page Page Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyMiscellaneous Assembly Weider Cable Diagrams Long Cable Adjustment Changing the Weight SettingUsing the Curl Pad Trouble-shooting and Maintenance Press Lbs Weight Resistance ChartHigh Arm Butterfly Curl Leg Raise Weight Plates LbsPage Part Identification Chart-Model No R1299APart List-Model No Qty DescriptionExploded Drawing-Model No QUESTIONS? Model No