33.Locate the Leg Lever Cable (96). Route the eyelet end of the Cable through the Right Leg (73) and attach it to the Leg Lever (4) with an M10 x 25mm Shoulder Bolt (99) and an M10 Nylon Locknut (70).
34.Attach a 90mm Pulley (38) inside the Right Leg (73) with an M10 x 70mm Bolt (81), two M10 Washers (75), two 13mm Spacers (34), and an M10 Nylon Locknut (70).
35.Wrap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley and a Cable Trap (91) to the Right Upright (6) with an M10 x 95mm Bolt (98), an M10 Washers (75), and an M10 Nylon Locknut (70). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.
36.Wrap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley to the Double “U”- Bracket (103) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).
33 |
|
|
|
4 |
|
|
|
70 | 73 |
|
|
|
|
| |
| 96 |
|
|
| 99 |
|
|
34 |
|
|
|
| 70 | 73 | 38 |
|
| ||
| 75 |
|
|
| 34 |
|
|
|
|
| 75 |
|
|
| 34 |
|
|
| 81 |
35 |
|
|
|
|
|
| 6 |
| 70 | 75 |
|
| 96 |
| 91 |
|
|
| |
|
|
| 38 |
|
|
| 98 |
36 |
|
|
|
|
|
| 70 |
| 66 |
|
|
|
|
| 103 |
|
| 38 | |
|
|
| 96 |
15