Weider WESY29521 user manual Repeat this step with the Short Pad Tube Leg Lever

SEAT ASSEMBLY	49
49. Press two 20mm x 40mm Inner Caps (104) and a	16
25mm x 40mm Inner Cap (105) into an Adjustable			104
Seat Frame (100).
Attach a Seat (16) to an Adjustable Seat Frame	100
(100) with two M6 x 16mm Screws (13), an M6 x	104		35
33mm Screw (90), and an M6 Washer (35).	13		105 90
Insert the Adjustable Seat Frame (100) into the		5
Right Seat Frame (5) and secure it with an
Adjustment Knob (102).		102
Repeat this step with the other Seat (16) and	50
the Left Seat Frame (not shown).		104	6
50. Press two 20mm x 40mm Inner Caps (104) and a		101	13
25mm x 40mm Inner Cap (105) into the
Adjustable Backrest Frame (101).
Attach a Backrest (15) to the Adjustable Backrest	15		13	105
Frame (101) with four M6 x 16mm Bolts (13).					102
Insert the Adjustable Backrest Frame (101) into
the Right Upright (6) and secure it with an
Adjustment Knob (102).		104
Attach the other Backrest (15) and the Left
Upright (not shown) with four M6 x 16mm	51
Bolts (13).	18
51. Slide the Long Pad Tube (17) through the hole in	27
the Right Leg (73). Slide two Foam Pads (18)	17		18
onto the ends of the Pad Tube. Press two 19mm
	4
Round Inner Caps (27) into the ends of the Pad
Tube.	94	27
Repeat this step with the Short Pad Tube (94)
and the Leg Lever (4).			73
52. Press a 50mm x 70mm Inner Cap (22) into the	52
indicated end of the Adjustment Tube (88).
Attach the Leg Press Plate (31) to the Adjustment	87	22
Tube (88) with an M8 x 65mm Bolt (89), two M8			88
				26	71
Washers (26), and an M8 Nylon Locknut (71).
Attach the Adjustment Tube (88) to the Leg Press		26
Frame (30) with the Leg Press Pin (87). Be sure
the Pin is in the locked position around the		30
Leg Press Frame.			89
					31
	19