Weider WESY29520 user manual Locate the Leg Lever Cable, Locknut, Pulley, 102

Page 15

33.Locate the Leg Lever Cable (96).	Route the
eyelet end of the Cable through the Right Leg

(73)and attach it to the Leg Lever (4) with a 5/16” x 1” Shoulder Bolt (78) and a 5/16” Nylon Locknut

34.Attach a 3 1/2” Pulley (38) inside the Right Leg

(73)with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two 1/2” Spacers (34), and a 3/8”

Nylon Locknut (70).

35.Route the Leg Lever Cable (96) through the Right Upright (6) and around a 3 1/2” Pulley (38). Attach the Pulley and a Cable Trap (91) to the

Upright with a 3/8” x 3 3/4” Bolt (84), a 3/8” Washer (75), and a 3/8” Nylon Locknut (70).

36.Wrap the Leg Lever Cable (96) around a 3 1/2” Pulley (38). Attach the Pulley to the Double “U”- Bracket (102) with a 3/8” x 2” Bolt (62) and a 3/8”

Nylon	Locknut (70).	Be sure the Cable Trap is
turned	to hold the Cable in the groove of the
Pulley.

33
4
71		73
		73
	96	78
		78
34
	70	73	38
	70
	75
		34
			75
		34
			81
35		6
		6
		96
		70
		75
			91
			84
		38
36
			70
		62	102
			102
			96
		38

15

Image 15

Contents Customer HOT Line QUESTIONS?Model No. WESY29520 Serial No Serial Number Decal under seatTable of Contents Important Precautions Right Side Using the weight systemBefore YOU Begin Left Side DecalMake Things Easier for Yourself AssemblyFrame Assembly Assembly requires two peopleSide shown Do not tighten the 5/16 Nylon Locknuts 71 yet Do not tighten the 5/16 Nylon Locknuts Yet Tom of the Weight Tube 82. Insert the Weight Holes Be sure the Weight Tube is oriented as ShownNot tighten the Locknuts yet Repeat this step with the Left Butterfly Arm ARM AssemblyMust be able to pivot easily. Be sure Welded bushing in the Butterfly ArmMust be able to pivot easily X 2 Bolt 62 and a 3/8 Nylon Locknut Cable AssemblyLocate the High Cable Is turned to hold the Cable in the groove of the Pulley A 3/8 Nylon Locknut Attach the Small U-Bracket 79 to the Weight A 1/4 Nylon Locknut IngCable to the Pivot Bracket 48 on the Left Locate the Butterfly Cable 46. AttachCable in the groove of the Pulley 102 Locate the Leg Lever CableLocknut PulleyIng Locate the Low Cable 47.Route the small ball To hold the Cable in the groove of the PulleyCage Page 4 Bolt 84, a 3/8 Washer 75, and a 3/8 Be sure Seat AssemblyLeft Seat Frame not shown Leg LeverChanging the Weight Setting AdjustmentsAttaching the Accessories to a Pulley Station AdjustSee drawing B Adjusting the LEG Press PlateTightening the Cables See drawing aAdjusting the Seat and Backrest Converting the Butterfly ArmsButterfly Lbs Top Weight Resistance ChartWeight High Press LEG Butter LOW Pulley ARM FLY ARM Lever PulleyLow Cable Cable Diagrams46 47 3/7 96 97 3/4 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartExercise Guidelines Muscle Chart Cooling DownStaying Motivated Part No R1002A Ordering Replacement PartsLimited Warranty Icon Health & FITNESS, INC., 1500 S W., LOGAN, UTCheck to see if it has been pre-assembled Part Identification Chart Page Save this Part LIST/EXPLODED Drawing for Future Reference Description Key No. Qty Part LIST-Model No. WESY29520R1002A