Weider WESY29520 user manual Check to see if it has been pre-assembled

Page 29

This chart		is provided to help you identify the small parts used in assembly. The number in parenthesis below
each	part refers to the key number of the part from the PART LIST in the center of this manual.		Important:
Some	parts	may have been pre-assembled for shipping. If you cannot find a part in the parts bags,

check to see if it has been pre-assembled.

Note: Assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged separately. Wait until you begin each stage to open the parts bag for that stage.

Image 29

Contents Model No. WESY29520 Serial No QUESTIONS?Serial Number Decal under seat Customer HOT LineTable of Contents Important Precautions Before YOU Begin Using the weight systemLeft Side Decal Right SideFrame Assembly AssemblyAssembly requires two people Make Things Easier for YourselfSide shown Do not tighten the 5/16 Nylon Locknuts 71 yet Do not tighten the 5/16 Nylon Locknuts Yet Not tighten the Locknuts yet Tom of the Weight Tube 82. Insert the Weight HolesBe sure the Weight Tube is oriented as Shown Repeat this step with the Left Butterfly Arm ARM AssemblyMust be able to pivot easily Must be able to pivot easily. Be sureWelded bushing in the Butterfly Arm Locate the High Cable Cable AssemblyIs turned to hold the Cable in the groove of the Pulley X 2 Bolt 62 and a 3/8 Nylon LocknutA 1/4 Nylon Locknut Attach the Small U-Bracket 79 to the WeightIng A 3/8 Nylon LocknutCable to the Pivot Bracket 48 on the Left Locate the Butterfly Cable 46. AttachCable in the groove of the Pulley Locknut Locate the Leg Lever CablePulley 102Cage Ing Locate the Low Cable 47.Route the small ballTo hold the Cable in the groove of the Pulley Page 4 Bolt 84, a 3/8 Washer 75, and a 3/8 Left Seat Frame not shown Seat AssemblyLeg Lever Be sureAttaching the Accessories to a Pulley Station AdjustmentsAdjust Changing the Weight SettingTightening the Cables Adjusting the LEG Press PlateSee drawing a See drawing BButterfly Adjusting the Seat and BackrestConverting the Butterfly Arms Weight High Press LEG Butter LOW Pulley ARM FLY ARM Weight Resistance ChartLever Pulley Lbs TopLow Cable Cable Diagrams46 47 3/7 96 97 3/4 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartExercise Guidelines Staying Motivated Muscle ChartCooling Down Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R1002ACheck to see if it has been pre-assembled Part Identification Chart Page Save this Part LIST/EXPLODED Drawing for Future Reference Description Key No. Qty Part LIST-Model No. WESY29520R1002A