3. Attach the Base Plate (37) to the Left Base (2)
with a 3/8” x 5 1/2” Bolt (58) and a 3/8” Nylon Locknut (70).
Attach the Left Upright (7) to the Left Base (2) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Attach the Left Leg (36) to the Left Base (2) with the two indicated 5/16” x 2 1/2” Carriage Bolts
(57) and two 5/16” Nylon Locknuts (71). Be sure the large upper hole in the Left Leg is on the
side shown.
Do not tighten the 5/16” Nylon Locknuts (71) yet.
4.Press a 2” x 2 1/2” Inner Cap (22) into the top of the Right Leg (73). Press a 1 1/2” Square Inner Cap (41) into the Right Upright (6).
Attach the Right Upright (6) to the Right Base (1) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Attach the Bumper (25) to the Right Leg (73) with the #10 x 1” Screw (77).
Attach the Right Leg (73) to the Right Base (1) with the two indicated 5/16” x 2 1/2” Carriage Bolts (57) and two 5/16” Nylon Locknuts (71).
Do not tighten the 5/16” Nylon Locknuts (71) yet.
3 |
|
|
|
|
| 7 |
|
| 2 | 71 | 36 |
| 71 |
| |
|
| Large | |
|
|
| |
|
| 71 | Hole |
|
|
| 71 |
|
| 57 |
|
|
|
| 70 |
|
| 57 | 37 |
|
|
| |
|
| 58 |
|
4 |
|
|
|
|
| 41 |
|
|
| 6 |
|
|
| 22 |
|
|
| 73 | 71 |
| 25 | 71 |
|
|
|
| |
77 |
| 71 |
|
|
|
| |
|
| 71 | 57 |
|
|
| |
|
| 1 |
|
|
| 57 |
|
6