JVC CA-HXZ3 Setting the AM Tuner Interval Spacing, Creating Your Own Sound Mode-UserMode, English

Page 17
Creating Your Own Sound Mode—User Mode

Creating Your Own Sound Mode—User Mode

You can change SEA pattern to suit your preference. The SEA pattern can be adjusted into 5 frequency ranges—LOW1, LOW2, MID, HIGH1, and HIGH2. These changed settings can be stored in the USER 1, USER 2, and USER 3 modes.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1 Select one of the preset sound modes.

5 Turn 4 / ¢ to select one of the user modes (USER 1, USER 2, or USER 3) in which you want to store your SEA pattern.

6 Press SET/DISPLAY again.

English

PR

E

SET

SET /

DISPLAY

•If you want to add the surround elements in your SEA pattern, select one of the surround modes (DANCE, HALL, or STADIUM) before starting the procedure below. (See “Selecting the Sound Modes” on page 11.)

2

Press SET/DISPLAY while the

SET /

DISPLAY

selected sound mode is still shown on the display.

Current level appears.

3 Adjust the SEA pattern.

 

E

 

 

PR SET

1) Turn 4 / ¢ to select the frequency range (LOW1, LOW2, MID, HIGH1, or HIGH2).

2)Press 1 or ¡ to adjust the level (–3 to +3) of the selected frequency range.

3)Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

4 Press SET/DISPLAY again.

SET /

 

 

 

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

The SEA pattern you have created are stored into the user mode selected in step 5.

To use your own sound mode

Select USER 1, USER 2, or USER 3 mode when using the sound modes. See “Selecting the Sound Modes” on page 11.

When you unplug the AC power cord or if a power failure occurs

The setting will be erased in a few days. If this happens, set the user modes again.

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.

On the unit ONLY:

You can only change the AM tuner interval spacing while tuning in to an AM station. (See page 13.)

Press 1 Select one of the preset sound modes. while holding down 7.

•Each time you press these buttons, the AM tuner interval spacing alternates between 9 kHz and 10 kHz.

– 12 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents COMPACT COMPONENT SYSTEM CA-HXZ3INSTRUCTIONS For Customer UseAvisos, precauciones y otras notas Warnings, Cautions and OthersAdvertências, precauções e outras notas G-1English Español Português G-2PRECAUCIÓN PRECAUÇÃOCaution Proper Ventilation G-3Precaución El aparato debe estar bien ventilado Precaução Ventilação adequadaEnglish Español G-4Português IMPORTANT FOR LASER PRODUCTSInstallation PrecautionsPower sources IntroductionEnglish ContentsFront Panel Location of the Buttons and ControlsFront Panel EnglishPressing this button also turns on the unit Display WindowEnglish Front PanelEnglish Remote ControlRemote Control Connecting Antennas Supplied AccessoriesPutting the Batteries into the Remote Control Getting StartedAM antenna Connecting SpeakersTo connect an outdoor AM antenna 2Insert the end of the speaker cord into theAdjusting the Voltage Selector Connecting Other EquipmentCanceling the Demonstration To connect an analog componentOn the remote control ONLY Turning On or Off the PowerCommon Operations EcologyModeAdjusting the Volume Setting the Clock1 Press CLOCK/TIMER 2 Turn 4 / ¢ to adjust theReinforcing the Bass Sound on the remote control until the sound modeSelecting the Sound Modes To select the sound modes, turn1 Select one of the preset sound modes Setting the AM Tuner Interval SpacingCreating Your Own Sound Mode-UserMode 6 Press SET/DISPLAY againTuning in to a Preset Station Tuning in to a StationPresetting Stations 1 Tune in to the station you want to presetWhat is MP3? When playing a CD-Ror CD-RWWhen and why they light up? When and why they go off?English How are MP3 files recorded and played back?Loading Discs Playing Back DiscsPlaying Back the Entire Discs-ContinuousPlay 7For audio CDs3 Select a track to start playing with Basic Disc OperationsDisc playback sequence To exchange discs during playback of anotherdisc in step 4 Select a track from the selectedTurn 4 / ¢ to select the track number, then press SET/DISPLAYPlaying at Random-RandomPlay To check the program contents1 Load a disc To modify the programProhibiting Disc Ejection-TrayLock Repeating Tracks or Discs-RepeatPlayFor audio CDs For MP3 discsLocating the Beginning of a Song-MusicScan Playing Back Tapes1 Press 0 EJECT for the cassette deck Close the cassette holder gentlyRecording To clean the heads, capstans, and pinch rollersRecording on a Tape 2 Close the cassette holder gently7Direct Recording Synchronized Recording4 Press CD REC START Load a disc Select a discthe Reverse Mode indicator lights up like button where a disc is loaded7Auto Edit Recording only for audio CDs Load a discSinging along-Karaoke 3 Press KARAOKE on the remote control7Vocal Masking 1 Turn MIC LEVEL to MINUsing Daily Timer Using the TimersHow Daily Timer actually works 2 Press CLOCK/TIMER againWhen selecting “1 CD--1” 6 When selecting “TUNER FM” or “TUNERAM”volume level the Daily Timer settingHow Recording Timer actually works Using Recording Timer2 Press CLOCK/TIMER 3 Press CLOCK/TIMER againTimer Priority Using Sleep TimerHow Sleep Timer actually works 2 To turn off the Recording Timer, pressCleaning the unit MaintenanceTo clean the disc Handling discsSymptom TroubleshootingEnglish CauseSupplied accessories SpecificationsAmplifier section TunerMEMO MEMO IMPORTANTE para la línea de la red CA IMPORTANT for mains AC lineIMPORTANTE para a ligação à tensão da rede CA EN, SP, PREspañol DemonstrationDemostración Demonstração
Top Page Image Contents