JVC CA-HXZ3 manual Using Sleep Timer, Timer Priority, How Sleep Timer actually works, Press SLEEP

English

To turn on or off Recording Timer after its setting is done

1 Press CLOCK/TIMER repeatedly until	/ TIMER
	CLOCK

“REC” appears on the display.

The REC (Recording Timer) indicator starts flashing on the display and the (Timer) indicator remains lit.

2 To turn off the Recording Timer, press CANCEL / DEMO

CANCEL/DEMO.

The REC (Recording Timer) indicator goes off from the display (“REC OFF” appears on the display for 2 seconds).

The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.

Or
To turn on the Recording Timer, press	DISPLAY
	SET /
SET/DISPLAY.

“OK ” appears on the display for 2 seconds. The settings you have done are shown on the display in sequence for your confirmation.

Using Sleep Timer

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time (minute) until the shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off.

• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the settings for these timers overlap.

Below are some examples.

Recording Timer has priority over Daily Timer and Sleep Timer.

•If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.

6:00 6:30 7:00 7:30

Recording Timer

Daily Timer

does not work.

With Sleep Timer, you can fall asleep to music. You can set Sleep Timer only while the unit is turned on.

•If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will be canceled.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1	Press SLEEP.							SLEEP
	The time length until the shut-off time
	appears and the SLEEP indicator starts
	flashing on the display.
	• Each time you press the button, the time length changes
	as follows:
		SLEEP 10		SLEEP 20		SLEEP 30		SLEEP 60
			Canceled		SLEEP 120		SLEEP 90

•If the built-in clock has not been set, “CLOCK ADJUST” appears on the display.

2 Wait for about 5 seconds after specifying the time length.

The SLEEP indicator stops flashing and remains lit.

21:00	21:30	22:00	22:30
Recording Timer
Sleep Timer
	canceled.

– 29 –