English
To check the program contents
On the remote control ONLY:
Before playing, you can check the program contents by pressing
4(1) or ¢ (¡).
•4 (1) : Shows the programed tracks in the reverse order.
•¢ (¡) : Shows them in the programed order.
Playing at Random—Random Play
The tracks of the currently selected disc will be played at random.
•To use Repeat Play (see page 20) for Random Play, press REPEAT after starting Random Play. Only REPEAT 1 and REPEAT ALL can be selected for Random Play.
1 Load a disc.
To modify the program
Before or after playing, you can erase the last programed tracks by pressing CANCEL/DEMO (or press PROGRAM CANCEL on the remote control).
•Each time you press the button, the last programed track is erased from the program.
CANCEL / DEMO
PROGRAM
CANCEL
2 Press the corresponding disc number (CD1, CD2, or CD3) button where a disc is loaded in step 1, then press 7.
CD3
CD2
CD1
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 4 of the programming procedure. If you want to add tracks from another disc, follow steps 3 and 4.
To erase the entire program before or after playing, press and hold 7 until “CD PROGRAM” appears on the display.
•The program you have made will be erased,
–when you exit from Program Play mode,
–when you unplug the AC power cord, or
–when a power failure occurs.
3 Activate the Random Play mode.
On the unit:
CD PLAY
Press CD PLAY MODE repeatedly MODE until “CD RANDOM” appears on
the display.
•Each time you press the button, the play mode changes as follows:
CD PROGRAM 
CD RANDOM
Canceled
(Continuous Play)
On the remote control:
| Press RANDOM so that | RANDOM |
|
|
|
| |||||
|
|
|
|
|
| |||||
| “CD RANDOM” appears |
|
|
|
|
|
|
|
|
| |
| on the display. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 | 4 | |||||
|
|
| 5 |
| 6 |
| 7 |
| 8 |
|
|
|
| 9 |
| 10 |
| 11 |
| 12 |
|
|
|
| RANDOM | |||||||
|
|
|
|
|
|
|
|
|
|
|
• The RANDOM indicator also lights up on the display.
4 Press CD 3¥8. | CD |
|
The tracks are randomly played. Random Play ends when all the tracks of the current disc are played once.
To skip the currently playing track, turn 4 / ¢ to the right (or press ¢ (¡) on the remote control).
If you turn 4 / ¢ to the left (or press 4 (1) on the remote control)
You cannot go back to the previous tracks during Random Play.
To stop playing, press 7.
To exit from Random Play mode, press CD PLAY MODE
repeatedly until the RANDOM indicator goes off (or press RANDOM on the remote control) after playback stops.