Weider WEBE27320 user manual

3.Press two Bushings (34) into the Bench Frame

(2).

Attach the Bench Frame (2) to the Front Leg (4) with four M10 x 94mm Bolts (18), two Joint Plates (39), and four M10 Nylon Locknuts (32). Do not tighten the Locknuts yet.

4.Press four 20mm x 40mm Inner Caps (20) into the ends of the two Backrest Frames (6).

Attach the Backrest Frames (6) to the Backrest Bracket (9) with four M10 x 58mm Bolts (73), four M10 Washers (74), and four M10 Nylon Locknuts (32). Make sure the Backrest Frames are ori- ented as shown. The Backrests Frames must be parallel, with the indicated holes aligned.

5.Attach the Backrest (10) to the Backrest Frames

(6) with four M6 x 53mm Bolts (29) and four M6 Washers (37). Note: If the four Bolts will not insert into the Backrest properly, go back to step 4 and readjust the Backrest Frames.

3
39	34	2
32
			34
4
		39	18
4			73
	73
			20
	74
	74
6
Holes
20
9
		32
5
10
			6
			37
37			29
29

6