ATTACHING THE ACCESSORIES
To attach the Lat Bar (82) to the high pulleys, first attach the high pulley to the resistance system (see ATTACHING THE HIGH PULLEYS on page 13). Then, attach the Lat Bar to a High Cable (101) with a Cable Clip (94). Attach the Lat Bar to the other High Cable in the same manner.
The Handles (not shown) and the Ankle Strap (not shown) can be attached to the High Cables (101) or the lower cable (not shown) with Cable Clips (94). Attach the Hip Strap (not shown) to the ends of the lower cable with two Cable Clips.
ATTACHING THE CURL PAD
To attach the Curl Pad (43), insert the Curl Post (42) into the Leg (5). Secure the Curl Post with the Curl Knob (59).
Remove the Curl Pad (43) from the resistance system when performing an exercise that does not require it.
ATTACHING THE CURL BAR
To use the Curl Bar (53), first attach the leg lever to the leg (see USING THE LEG LEVER on page 13). Attach the Curl Bar to the hook on the Leg Lever (56) with a Cable Clip (94).
101 |
94 |
101 |
82 |
43 |
42 |
59 |
5 |
53 |
94 |
56 |
14