27.Find the Press Cable (88)Ñthis is the longest Cable. Attach the end of the Press Cable (88) to the Large ÒUÓ Bracket (84) with a 1/4Ó Nylon Locknut (44) and a 1/4Ó Washer (37). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing.
28.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the indicated bracket on the Press Base (13) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Locknut (42). Make sure the Cable Trap is turned to hold the Cable in place.
29.Wrap the Press Cable (88) around a 3 1/2Ó Pulley (82). Attach the Pulley and a Cable Trap (80) to the other bracket on the Press Base (13) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Locknut (42). Make sure the Cable Trap is turned to hold the Cable in place.
27 |
|
|
|
|
| 44 |
|
|
| 37 | 84 |
| 44 |
| |
|
|
| |
| 37 | 88 |
|
|
|
| |
88 | 84 |
|
|
|
|
| |
28 |
|
|
|
|
| 88 |
|
|
| 80 | 42 |
|
|
| |
|
| 82 |
|
| 50 | 13 |
|
29 |
|
|
|
|
| 88 |
|
|
|
| 80 |
|
| 82 | 42 |
|
|
| |
| 50 | 13 |
|
|
|
|
14