3.Press a 2Ó Square Inner Cap (56) into the end of the Top Frame (2). Press a 2Ó Square Inner Cap (56) into each side of the Butterfly Frame (3). Press two 1Ó Round Inner Caps (70) into the top of the Butterfly Frame.
Insert a 5/16Ó x 3Ó Bolt (92) through the bracket on the Butterfly Frame (3) and the Top Frame (2). Make sure that the Bolt is on the side shown. Tighten a 5/16Ó Nylon Jam Nut (91) with a 5/16Ó Washer (20) onto the Bolt.
Insert a 5/16Ó x 2 3/4Ó Bolt (55) through the bracket on the Butterfly Frame (3) and the Top Frame (2).
Make sure that the Bolt is on the side shown.
Hand tighten a 5/16Ó Washer (20) and a 5/16Ó Nylon Locknut (40) onto the Bolt.
4.Slide the Front Seat Frame (8) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (49) in the Press Base (13). Hand tighten two 5/16Ó Nylon Locknuts (40) onto the Carriage Bolts.
Attach the other end of the Front Seat Frame (8) to the Leg Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20) and two 5/16Ó Nylon Locknuts (40).
Press a 2Ó Square Inner Cap (56) into the Front Seat Frame (8).
6
3 |
|
|
|
|
91 | 20 |
|
|
|
40 |
|
|
|
|
20 |
| 92 | 70 | 56 |
2 |
|
|
|
|
| 55 |
|
| 3 |
56 |
| 56 |
|
|
|
|
|
| |
4 |
|
|
|
|
55 | 40 |
|
|
|
|
|
|
| |
20 |
| 8 |
|
|
|
|
|
| |
4 |
|
|
| 56 |
| 13 |
| 40 | |
|
|
|
| |
| 49 |
|
|
|