46.Remove the indicated 3/8Ó x 2Ó Bolt (50), the 3/8Ó Nylon Locknut (42), the 3 1/2Ó Pulley (82) and the Cable Trap (80) from the indicated Pulley Plates (31). Lay the Low Cable (86) over the Pulley.
Make sure the Cable Trap is turned to hold the Cable in place.
47.Wrap the Low Cable (86) around a 3 1/2Ó Pulley (82). Attach the Pulley to the Lat Upright (1) with the 3/8Ó x 3 1/2Ó Bolt (66), a 3/8Ó Washer (38) and a 3/8Ó Nylon Jamnut (43). The ball on the Cable must be on the indicated side of the Pulley. Make sure the Cable and Pulley move smoothly and that the Cable is between the Pulley and the post.
46 |
31 |
42 |
50 |
82 |
80 |
86 |
47 |
86
1
43
38
82
66
Post
19