JVC CA-D672TR Presetting Stations, To Change the FM Reception Mode, Selecting a radio station

Page 17

TUNER

Selecting a radio station ——————————————————————

❏Select a frequency by adjusting the MULTI CONTROL stick up or down. The frequency changes in one step increments. “TUNED” appears on the display when a signal is found. This is called Manual Tuning.

The frequency increases when MULTI CONTROL stick is pressed upwards, and decreases when the MULTI CONTROL stick is pressed downwards.

❏If the MULTI CONTROL stick is pressed up or down continuously for a few seconds, the frequency changes continuously until a signal is found, then “TUNED” appears on the display. This is called Auto Tuning.

❏Possible only after presetting stations.

Using the Unit

Select a preset channel by adjusting the MULTI CONTROL stick left or right.

Using the Remote Control

1.Press the TUNER button so that you can receive the most recent station tuned in.

2.Select the station by entering the preset number in the number keys of the Remote Control.

❏ Example: for channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press +10, then 10. For channel 32, press +10 three times, then 2.

English

Presetting Stations

1

FM/AM

2

3

SET

4

5

SET

You can store up to 40 of your favourite radio stations (FM and AM (MW/LW)) in memory, giving you quick, easy access to the stations.

Note: In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

1. Select a frequency band by pressing the FM/AM button.

2. Tune to a station by adjusting the MULTI CONTROL stick up or down.

3. Press the SET button .

On the display, “SET” will blink for 5 seconds.

❏During these 5 seconds while “SET” is blinking, you can assign a channel number to the station and enter it into the memory.

4.Select a preset number by adjusting the MULTI CONTROL stick left or right.

5.Press the SET button and the station will be assigned to the channel number showing on the display.

“MEMORY” appears in the display.

❏If a station has been previously stored using the same channel number, this will be erased and the newly selected station will be stored.

❏If “SET” in the display goes off, start again from step 3.

6.Repeat steps 1 - 5 for each station you want to store in memory with a preset number.

CAUTION: If the Unit is unplugged or if a power failure occurs, the preset stations will be erased after a few days. If this happens, preset the station again.

To Change the FM Reception Mode

FM MODE

When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the Remote Control so that the “AUTO” indicator goes off in the display. Reception improves, but there are no stereo effects, In this monaural mode, noise comes out while tuning in stations (since muting is also cancelled).

To restore the stereo effect, press the FM MODE button on the Remote Control so that the “AUTO” indicator lights up. In this stereo mode, no noise comes out while tuning in stations, and you can

hear stereo sounds when a program is broadcast in stereo.

13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CA-D672TR If in Doubt Consult a Competent ELECTRI- Cian CA-D672TR Class Laser Product How This Manual Is Organized FeaturesTable of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedRight speaker Connecting a VCRAudio OUT AudioAdjusting the Brightness of the Display Demo ModeOn the Remote Control To turn the Demo display on, press the Demo buttonTurning the Power On and Off Using the AmplifierDisplay Turning the CA-D672TR OnBass Mode Adjusting the VolumeBalance adjustment Fade Muting FunctionSound Modes Customizing a Sound Mode Using a VCR Auto Power OffListening to a VCR Recording to a VCRTuning In a Station Using the TunerSwitching between Frequency Bands One Touch RadioSelecting a radio station Presetting StationsTo Change the FM Reception Mode What Information RDS can Provide Receiving FM Stations with RDSStation Frequency PS Programme ServiceChanging the Display EON Function Setting EON Standby reception Press the EON ON/OFF buttonPress the PTY Select button to choose a PTY News NewsBlinking Alarm functionCancel SET Multi Control Using the CD PlayerDisc indicator Disc displayPower comes on, and operations are done automatically Basics of Using the CD Player Continuous PlayTo Insert Discs Place a CD, with its label side up, onto the trayTo Change Discs While Playing To Play a DiscResume To Select a Track Programming the Playing Order of the TracksTo Select a Passage Within a Track Press the PROGRAM/RANDOM buttonDisc Track Step Number number number Select a disc with the Disc buttons 1 toPress the Ü/8or CD button Select a disc with the Disc buttonsRandom Play Mode displayTo Check the Program To Modify the ProgramTray Lock Function Repeating a Selection or the DiscsLocking the Electronic Lock Unlocking the Electronic LockTape Direction Indicator on the Display Using the Cassette Deck Listening to a TapeDeck Control buttons TapeFast Left and Fast Right Regular PlayOne Touch Play Reverse Mode on Other Useful Features of the Cassette DeckMusic Scan Press the 1or Ábutton during playThings To Know Before You Start Recording Using the Cassette Deck RecordingEdit DubbingCheck the recording direction for the tape Standard RecordingTo Record Any Sound Source To Tape CD Direct Recording Dubbing REC CD REC Start 6. Press the CD REC Start button Auto Edit RecordingPress the Disc button for the disc you want to record Press the Dubbing button How to Use the Dubbing ButtonTape to Tape Recording Dubbing Setting the Clock Using the TimersMulti Control SET Cancel Press the TIMER/CLOCK buttonProcedure For Setting the Daily Timer Setting the Daily TimerPress the TIMER/CLOCK button again Set the time you want the Unit to turn onTo use another source To use a CD as the sourceTo use a Cassette Deck as the source Setting the Volume Level Turning the Daily Timer On and OffTo change the Daily Timer setting SET 7. Press the SET buttonSetting the REC Recording Timer Turning the REC Timer On and Off Setting the Sleep TimerTo set the Sleep Timer, follow this procedure To Change the Sleep Timer SettingOFF Timer PriorityCare And Maintenance Possible Cause Action TroubleshootingSymptom Specifications EN, GE, FR, NL, SP, IT JVC 0298HHMFLEJEM
Top Page Image Contents