Auto Power Off, Using a VCR, Listening to a VCR

Auto Power Off

	When playing either a tape or a CD, Auto Power Off will shut the Unit off when the tape or CD
	comes to an end. Although Auto Power Off is very useful for shutting off the CA-D672TR at night,
	you can also use it if you think you might forget to turn the Unit off when leaving the house or your
	room at other times of the day.
AUTO POWER OFF	To Use Auto Power Off
	Press the AUTO POWER OFF button, the AUTO POWER OFF button lights up.
	To Cancel Auto Power Off
	Press the AUTO POWER OFF button again, the AUTO POWER OFF button goes out.

Important Information On Using Auto Power Off

❏The end of CD playback varies depending on the play mode of the CD Player. If the play mode is Continuous or “RANDOM”, when all tracks on the disc set in the CD player end, the power is automatically turned off. If the play mode is “PROGRAM”, the power is automatically turned off when the last track you programmed ends.

❏Auto Power Off will still work even though you press the REPEAT button.

Repeat Mode (“REPEAT ALL” indicator lights up on the display):

This automatically turns off the power after all the tracks on the CDs in the CD Player have been played.

Repeat 1 CD Mode (“REPEAT 1 CD” indicator appears on the display):

This automatically turns the power off after all of the tracks on the CD have been played.

Repeat 1 Mode (“REPEAT 1” indicator lights up on the display):

This automatically turns the power off after the selected track has been played.

❏If you press the AUTO POWER OFF button while the tape is playing:

•If Reverse Mode is off, the Unit turns off when the current side finishes.

•If Reverse Mode is on, the Unit will turn off when the tape finishes playing in the Û direction.

Using a VCR

English

VCR

Listening to a VCR ————————————————————————

By playing the sound from VCR through the CA-D672TR, you can gain control over how the music or program sounds. Once the connected equipment is playing through the CA-D672TR, you can apply the sound effects.

❏First make sure that the optional equipment is properly connected to the CA-D672TR. (See page 5).

1. Set the VOLUME control to 0.

2. Press the VCR button.

When CA-D672TR is in Standby mode, the Unit is automatically turned on and “VCR” appears on the display.

3. Start playing the equipment.

4. Adjust the VOLUME control to the desired listening level.

5. Select a sound effect mode, if you wish.

To Cancel the Setting

Change the source by starting any one of the CA-D672TR’s built-in sound sources, such as the Tuner or CD Player.

Recording to a VCR ————————————————————————

To record to a VCR, start playback of the recording source of the CA-D672TR and start recording on your VCR. (Refer to the VCR’s instruction manual for details on the recording procedure for your VCR.)

❏You cannot record using Sound mode effects.