JVC CA-D672TR manual Setting the REC Recording Timer

Page 41

Setting the REC (Recording) Timer

With the Recording Timer you can make a tape of a radio broadcast automatically whether or not you are home. For the timer to work correctly, you need to make sure of the following in addition to setting the time for the Tuner and Cassette Deck to come on:

 

❏

You can set the REC Timer whether the Unit is on or off.

 

❏

The tape you want to record onto must be in Deck B.

 

Procedure for Setting the REC Timer

SOUND MODE

 

 

1.

Press the TIMER/CLOCK button so that “REC Timer” appears in the display.

 

SEA CONTROL

The message “REC” blinks and the REC indicator light blinks on the display.

TIMER/CLOCK

REC

❏The display changes with each press of the button, as shown below.

DAILY (blinks) =ON TIME (blinks) =REC (blinks) = ON TIME (blinks) =CLOCK (blinks) (Clock setting mode) =original display before the TIMER/CLOCK button was pressed = (back to the beginning)

 

 

 

Note: If the clock has not been set, even if the TIMER/CLOCK button is pressed you cannot

 

 

 

select the REC Timer.

SOUND MODE

2.

Press the TIMER/CLOCK button again.

 

 

 

The display changes to the On Time display.

SEA CONTROL

 

 

 

 

 

 

 

 

 

 

 

REC ON

 

 

 

 

 

 

 

 

 

OFF

 

TIMER/CLOCK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Set the time you want the Unit to be turned on.

 

 

 

Set the time by adjusting the MULTI CONTROL stick left or right in the same way you set the

 

 

 

time for the clock. Press the SET button to set the on time.

 

 

4.

Set the time you want the Unit to be turned off.

 

 

 

Set the time by adjusting the MULTI CONTROL stick left or right in the same way you set the

 

 

 

time for the clock. Press the SET button to set the off time.

 

 

5.

Select the radio station you want to record.

 

 

6.

Set the radio station you want to record by adjusting the MULTI CONTROL stick up or down.

SET

Press the SET button.

 

 

 

 

 

 

 

 

 

 

 

The “REC” indicator changes from a blinking display to a steady display. The ON TIME, OFF

 

 

 

TIME, and preset channel number are displayed then the display reverts to the previous display,

 

 

 

before the Timer was set.

 

 

 

Turn the power off if you made the timer settings with the power turned on.

 

 

❏

A few seconds before the start time for the recording, the CA-D672TR automatically turns on

 

 

 

the power, and “REC TIMER” blinks on the display. When the start time is reached, recording

 

 

 

starts using the selected source. After the finish time for the recording is reached, the power is

 

 

 

automatically turned off again.

 

 

❏

If a button is pressed when the REC Timer is operating, recording continues but the timer is

 

 

 

cancelled.

Before the Timer Starts

❏Check that tape direction is correct. This is important especially when Reverse Mode is off.

❏Set Reverse Mode on if you want to record on both sides of the tape.

❏The VOLUME control is automatically set to 0 when REC Timer is recording.

English

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents CA-D672TR If in Doubt Consult a Competent ELECTRI- Cian CA-D672TR Class Laser Product How This Manual Is Organized FeaturesTable of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedRight speaker Connecting a VCRAudio OUT AudioAdjusting the Brightness of the Display Demo ModeOn the Remote Control To turn the Demo display on, press the Demo buttonTurning the Power On and Off Using the AmplifierDisplay Turning the CA-D672TR OnBass Mode Adjusting the VolumeBalance adjustment Fade Muting FunctionSound Modes Customizing a Sound Mode Using a VCR Auto Power OffListening to a VCR Recording to a VCRTuning In a Station Using the TunerSwitching between Frequency Bands One Touch RadioSelecting a radio station Presetting StationsTo Change the FM Reception Mode What Information RDS can Provide Receiving FM Stations with RDSStation Frequency PS Programme ServiceChanging the Display EON Function Setting EON Standby reception Press the EON ON/OFF buttonPress the PTY Select button to choose a PTY News NewsBlinking Alarm functionCancel SET Multi Control Using the CD PlayerDisc indicator Disc displayPower comes on, and operations are done automatically Basics of Using the CD Player Continuous PlayTo Insert Discs Place a CD, with its label side up, onto the trayTo Change Discs While Playing To Play a DiscResume To Select a Track Programming the Playing Order of the TracksTo Select a Passage Within a Track Press the PROGRAM/RANDOM buttonDisc Track Step Number number number Select a disc with the Disc buttons 1 toPress the Ü/8or CD button Select a disc with the Disc buttonsRandom Play Mode displayTo Check the Program To Modify the ProgramTray Lock Function Repeating a Selection or the DiscsLocking the Electronic Lock Unlocking the Electronic LockTape Direction Indicator on the Display Using the Cassette Deck Listening to a TapeDeck Control buttons TapeFast Left and Fast Right Regular PlayOne Touch Play Reverse Mode on Other Useful Features of the Cassette DeckMusic Scan Press the 1or Ábutton during playThings To Know Before You Start Recording Using the Cassette Deck RecordingEdit DubbingCheck the recording direction for the tape Standard RecordingTo Record Any Sound Source To Tape CD Direct Recording Dubbing REC CD REC Start 6. Press the CD REC Start button Auto Edit RecordingPress the Disc button for the disc you want to record Press the Dubbing button How to Use the Dubbing ButtonTape to Tape Recording Dubbing Setting the Clock Using the TimersMulti Control SET Cancel Press the TIMER/CLOCK buttonProcedure For Setting the Daily Timer Setting the Daily TimerPress the TIMER/CLOCK button again Set the time you want the Unit to turn onTo use another source To use a CD as the sourceTo use a Cassette Deck as the source Setting the Volume Level Turning the Daily Timer On and OffTo change the Daily Timer setting SET 7. Press the SET buttonSetting the REC Recording Timer Turning the REC Timer On and Off Setting the Sleep TimerTo set the Sleep Timer, follow this procedure To Change the Sleep Timer SettingOFF Timer PriorityCare And Maintenance Possible Cause Action TroubleshootingSymptom Specifications EN, GE, FR, NL, SP, IT JVC 0298HHMFLEJEM
Top Page Image Contents