JVC CA-D672TR manual Troubleshooting, Symptom, Possible Cause Action

Page 45

Troubleshooting

•If you are having a problem with your CA-D672TR, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

English

Symptom

No sound is heard.

Possible Cause		Action
Connections are incorrect, or loose.		Check all connections and make
		corrections. (See pages 4 - 5.)

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

Cassette record protect tabs are removed.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the Unit.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The main AC power cord is not plugged in.

Cover holes on back edge of cassette with tape.

•Re-connect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

•Remove the obstruction.

•Replace the batteries. Plug in the AC power plug.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

The CD is upside down.

The built-in microprocessor has malfunctioned due to external electrical interference.

During tape playing, the power cord was unplugged.

Put the CD in with the label side up.

Unplug the Unit then plug it back in.

Plug in the power cord, press the button, and then the 0 button.

41

Image 45

Contents CA-D672TR If in Doubt Consult a Competent ELECTRI- Cian CA-D672TR Class Laser Product How This Manual Is Organized FeaturesTable of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedRight speaker Connecting a VCRAudio OUT AudioAdjusting the Brightness of the Display Demo ModeOn the Remote Control To turn the Demo display on, press the Demo buttonTurning the Power On and Off Using the AmplifierDisplay Turning the CA-D672TR OnBass Mode Adjusting the VolumeBalance adjustment Fade Muting FunctionSound Modes Customizing a Sound Mode Using a VCR Auto Power OffListening to a VCR Recording to a VCRTuning In a Station Using the TunerSwitching between Frequency Bands One Touch RadioPresetting Stations To Change the FM Reception ModeSelecting a radio station What Information RDS can Provide Receiving FM Stations with RDSPS Programme Service Changing the DisplayStation Frequency EON Function Setting EON Standby reception Press the EON ON/OFF buttonPress the PTY Select button to choose a PTY News NewsBlinking Alarm functionCancel SET Multi Control Using the CD PlayerDisc indicator Disc displayPower comes on, and operations are done automatically Basics of Using the CD Player Continuous PlayTo Insert Discs Place a CD, with its label side up, onto the trayTo Play a Disc ResumeTo Change Discs While Playing To Select a Track Programming the Playing Order of the TracksTo Select a Passage Within a Track Press the PROGRAM/RANDOM buttonDisc Track Step Number number number Select a disc with the Disc buttons 1 toPress the Ü/8or CD button Select a disc with the Disc buttonsRandom Play Mode displayTo Check the Program To Modify the ProgramTray Lock Function Repeating a Selection or the DiscsLocking the Electronic Lock Unlocking the Electronic LockTape Direction Indicator on the Display Using the Cassette Deck Listening to a TapeDeck Control buttons TapeRegular Play One Touch PlayFast Left and Fast Right Reverse Mode on Other Useful Features of the Cassette DeckMusic Scan Press the 1or Ábutton during playThings To Know Before You Start Recording Using the Cassette Deck RecordingEdit DubbingStandard Recording To Record Any Sound Source To TapeCheck the recording direction for the tape CD Direct Recording Auto Edit Recording Press the Disc button for the disc you want to recordDubbing REC CD REC Start 6. Press the CD REC Start button How to Use the Dubbing Button Tape to Tape Recording DubbingPress the Dubbing button Setting the Clock Using the TimersMulti Control SET Cancel Press the TIMER/CLOCK buttonProcedure For Setting the Daily Timer Setting the Daily TimerPress the TIMER/CLOCK button again Set the time you want the Unit to turn onTo use a CD as the source To use a Cassette Deck as the sourceTo use another source Setting the Volume Level Turning the Daily Timer On and OffTo change the Daily Timer setting SET 7. Press the SET buttonSetting the REC Recording Timer Turning the REC Timer On and Off Setting the Sleep TimerTo set the Sleep Timer, follow this procedure To Change the Sleep Timer SettingOFF Timer PriorityCare And Maintenance Troubleshooting SymptomPossible Cause Action Specifications EN, GE, FR, NL, SP, IT JVC 0298HHMFLEJEM